Playchoice 10 dual monitor overlay?

I just bought the same one had it installed a month ago. I'm happy with the quality but I don't know about the fading since I only had it for a month.
 
My Playchoice overlay was so ripped it would cut your wrist so I had to get rid of it. I bought this over a year ago, I hate it. The colors are off and it is very thick it was cut wrong as well to tall on the top and short on the bottom. The red is a weird shade of purple, looks awful next to my nos nintendo red buttons. I will change it as soon as I can find a silk screened one. Make sure you primer the control panel and this over lay will not stick to the bare metal. Since Ultra is happy with it maybe they changed it over the last year?
 
It's fine.
Don't let people fool you into thinking anything but screen printed is crap.
I did my Gauntlet with their overlay years ago and it still looks great.
 
It's fine.
Don't let people fool you into thinking anything but screen printed is crap.
I did my Gauntlet with their overlay years ago and it still looks great.

Yeah, myself and another local have used their PC-10 overlay and we were both happy with it. It's been a couple years now and they are both still in good shape... and on location getting played daily.
 
thanks for the opinions(and keep'em coming) because this was all I could find for the dual but another site had a silkscreened single monitor one. Mine is in ok shape(divits in places and big scrapes up by the select buttons) but could stand to be replaced soon.
 
cpo

I redid my playchoice 10 dual screen cpo. took off old cpo and glue, sanded and primed. installed the one from arcade overlays. decent enough. I feel the quality is good. pics attached. sorry for all the thumbprints, noticed this after taking pics. the colors are bright and looks nice, some before and after pics:
 

Attachments

  • photo (11).jpg
    photo (11).jpg
    37.4 KB · Views: 29
  • photo (12).jpg
    photo (12).jpg
    36.8 KB · Views: 32
PC10 Dual Monitor CPO

My overlay looks similar to yours but to me the colors seem different. Be very careful when installing this CPO the 5 Small buttons on top are a bitch to line up! Take your time and measure 5X. With all the bends in the CP it definitely ups the difficulty factor mine turned out great as I took my time! Here's a few pics of the install. Use the clamps they help. I got lucky all my alignments are about perfect! Another Tip: Paint your Control panel bolts satin black it looks much better! Just my opinion.

~Chris
 

Attachments

  • DSCF2591.jpg
    DSCF2591.jpg
    94.7 KB · Views: 18
  • DSCF2734.jpg
    DSCF2734.jpg
    90.4 KB · Views: 22
  • DSCF2735.jpg
    DSCF2735.jpg
    95.9 KB · Views: 20
  • DSCF2737.jpg
    DSCF2737.jpg
    95.6 KB · Views: 20
  • DSCF2741.jpg
    DSCF2741.jpg
    95.1 KB · Views: 22
Back
Top Bottom