Ok, I'll start off with saying i'm very new to this. Actually, doing anything to the inside of a cabinet is new to me.
Back story: Just got the PC-10 Dual Monitor yesterday. The guy says it doesn't even turn on. Well I've got it on, with one working/sorta, but with Blue Tint. So I assume the Gun in the Monitor is gone. Already did the trouble shooting with that. The other monitor has a cracked control pcb, so I didn't even hock it up. Also, inorder to get it into my home, 3rd floor. We toke just about everything out of the cabinet. I've today put everything back. In doing so, i've noticed a few spots were the wire has been "repaired", going to the monitor. Also there is two ground leads on the CP I can't see were they are suppost to go.
So here is my issue. The center two buttoms don't seem to work. That would be the "Game Select" and "Start" buttons. Channel Select, Enter and Reset all work. PCB works and shows all games that are populated on the mainboard.
Normally I would just go to Playchoice.riemen.net and trouble shoot it. But they are currently down due to their web hoster.
Any help, even a redirect to a existing thread would be apperciated. I can only hope that its a Newbie Mistake.
Edit: Those leads I mentioned earlier. After taking another look, seem to be my issue. Im going to have to find a schmatic of the wiring to the CP. That should resolve my issue.
Back story: Just got the PC-10 Dual Monitor yesterday. The guy says it doesn't even turn on. Well I've got it on, with one working/sorta, but with Blue Tint. So I assume the Gun in the Monitor is gone. Already did the trouble shooting with that. The other monitor has a cracked control pcb, so I didn't even hock it up. Also, inorder to get it into my home, 3rd floor. We toke just about everything out of the cabinet. I've today put everything back. In doing so, i've noticed a few spots were the wire has been "repaired", going to the monitor. Also there is two ground leads on the CP I can't see were they are suppost to go.
So here is my issue. The center two buttoms don't seem to work. That would be the "Game Select" and "Start" buttons. Channel Select, Enter and Reset all work. PCB works and shows all games that are populated on the mainboard.
Normally I would just go to Playchoice.riemen.net and trouble shoot it. But they are currently down due to their web hoster.
Any help, even a redirect to a existing thread would be apperciated. I can only hope that its a Newbie Mistake.
Edit: Those leads I mentioned earlier. After taking another look, seem to be my issue. Im going to have to find a schmatic of the wiring to the CP. That should resolve my issue.
Last edited:
