Steelhorse
New member
Ok so my Pitch is at 6.2 degrees on my machine, I read that pre-1990 machines should be at 6 degrees and after 1990 to present should be at 6.5-7.0 dgrees. Now I had to raise the left front leveler up more then the right front by 1/4 inch and and the left rear leveler is at 2 1/4 inch off floor while the right rear leveler is at 2 inch off the floor. Damn tile floors are not flat, each tile has pits and groove that throw the level off so this is what I had to do to get it level and a over 6 dgree pitch. Is this right? It dont seem right as my legs or up high off the floor. my pitch before was only 5.4 de grees and used the inclinometer on my phone and purchased the "pen" type bubble level from Terry at pbl. If I dropp the front legs compleletly down then it's off so I had to raise the left leveler up, but read the fronts no matter what should always be dropped all the way. Someone please explain? The game plays great, but not real fast though as I thought with the extra pitch on angle.