Pit Fighter No Sound

Wldfire

Well-known member

Donor 5 years: 2011-2014, 2016
Joined
Oct 11, 2011
Messages
1,319
Reaction score
139
Location
Tahsis, BC, Canada
Hello, got a used board of Pit Fighter off a KLOV member awhile ago and just plugged it into a Jamma Cabinet i just got.
The game fires up nicely, and looks good
but no sound. When i turn up the volume control it gives me a high pitch hum/interference noise.
I ran the self test and everything seemed to check out fine other then NO sound.

I would appreciate any help at all on this.
Thank you kindly
Ken
 
Make sure your jamma cab has -5v going to the pcb. Pit Fighter needs -5v for sound and not all jamma cabs are wired for -5v.

Brian
 
Thank you for that information! I will break out my MM tomorrow and check it. I didn't realize that as im new to the whole Jamma thing and was just assuming it would be all the same.
Thanks!
 
I have the same problem!

going to check out the -5v

I have a guardians of the hood cab and i thought pit fighter was just plug n play but im getting the same no sound problem with the noise.
 
Back
Top Bottom