Pinouts for Capcom Street Fighter Alpha 3

vintageamuse

Permanently Banned - Proven known scammer beyond a
Joined
Mar 17, 2010
Messages
196
Reaction score
0
Location
Maine
Hi,
Can anyone tell me where I can find a manual or just the pinouts for the Capcom CPS 2 Street Fighter Alpha 3 game? Must be online somewhere I hope? If not maybe someone in the group can post them for me from their own manual... Having trouble with buttons not working and think maybe the grounds or something are not wired correctly in the harness.
 
It's JAMMA plus so the edge connector is the same as Jamma which are for all 3 of the punches and the 3 kicks are on the kick harness.
 
Thanks for the help guys. The cab is a conversion but hopefully it was done to specs, I'll check it tomorrow. I'm trying to connect a multi-game pcb in the cabinet(Pandora Box). Thought it would be a plug and play but apparentally not. I'm sure I'll have a couple more tech questions tomorrow so stay tuned if you please.
 
Thanks for the help guys. The cab is a conversion but hopefully it was done to specs, I'll check it tomorrow. I'm trying to connect a multi-game pcb in the cabinet(Pandora Box). Thought it would be a plug and play but apparentally not. I'm sure I'll have a couple more tech questions tomorrow so stay tuned if you please.


I am prety sure the Pandora Box is what is not 'done to spec'. Most of those Chinese multiboards use a non-standard Jamma harness. They pull two of the grounds off and use them for button inputs as well as populating buttons 4 and 5 on the Jamma harness. All of this is non-standard from an industry perspective.
 
Back
Top Bottom