pincushion?

coinopjunkie

Member

Donor 2011
Joined
Dec 2, 2011
Messages
689
Reaction score
6
Location
Moreno Valley, California
trying to help another member here, not sure what monitor it is but here is a screen shot.
I'm guessing a k7000 but not sure yet, have not seen it in person. The flow chart only suggest a cap kit and I'm not sure that will fix this, any thoughts.
 
here is a chassis picture

Anyone know what chassis this is, my guess is a k7000a but I can't see enough to know for sure. The owner thinks it's the width coil anyone have any ideas?
 

Attachments

  • IMG_5581.jpg
    IMG_5581.jpg
    97.2 KB · Views: 32
look at the flyback, if two wires coming out of it its a 7000A, if not regular k-7000. try replacing the cap on the neck board and see if that cleans up the pic. I just finished one that did the same thing and I replaced the fly and the neckboard cap and now it looks good.
 
the owner gave up

look at the flyback, if two wires coming out of it its a 7000A, if not regular k-7000. try replacing the cap on the neck board and see if that cleans up the pic. I just finished one that did the same thing and I replaced the fly and the neckboard cap and now it looks good.

the owner gave up on it and is selling it for 40.00 as is if anyone wants it.
 
look at the flyback, if two wires coming out of it its a 7000A, if not regular k-7000. try replacing the cap on the neck board and see if that cleans up the pic. I just finished one that did the same thing and I replaced the fly and the neckboard cap and now it looks good.

Thanks! That is good to know, I will try that on this.
 
19, 25" or 27" TUBE? If its a 27 make sure it has that stupid pincushion board on it. ive heard of but not verified the 27" version having pincushion issues if its running a 25" chassis due to not having that pincushion board. That looks pretty severe though.. cap and pray


Caps as always could be a good start.
 
Back
Top Bottom