Pinbot is home now but!

Pinbot

I would check too see if your getting HV Check the Fuse for the HV .. Sounds like your not too me.

You need that for the displays too work and so on.
 
Guys, I am finally getting around to trouble shooting the Pinbot. I am going to read over what was posted about and get started today!

Baby is 7 weeks old now and doing great!

Fun Fun,
 
Guys, I am finally getting around to trouble shooting the Pinbot. I am going to read over what was posted about and get started today!

Baby is 7 weeks old now and doing great!

Fun Fun,

Been there and done that jfruge, it is fun. Congrats to you and your family. You have plenty of time to get the pinball working, and I tell you baby's just love the flashing lights and the silverball rolling around, your baby's gonna love it :). My daughter's 1 years old and when she hears the pinball get turned on and boots up at home she literately comes running over excited and wants to be picked up to look at the pf, gotta love it! Fricken priceless!
 
I do seem to have the correct voltages on the powersupply output connector 3J6....12 +12 and +5.....on the correct pins...
 
Send your board to Rob Anthony:

http://www.lockwhenlit.com

It will probably cost about $150 but you will get a board that is 100% working. I would start with making sure your power supply board is putting out the correct voltages before troubleshooting the CPU board.

I have finished trying to test the cpu board on the bench. I can not get it to do anything.

I just sent an email into Rob and plan to send in the cpu board for repair.

Fun Fun,
 
I have finished trying to test the cpu board on the bench. I can not get it to do anything.

I just sent an email into Rob and plan to send in the cpu board for repair.

Fun Fun,

I sent the board off to be repaired Wed....... I can't wait to get it back!
 
My board has been repaired and is on its way back to me....! :D

Can't wait to get it installed and see what happens....

I shold have a package waiting for me today when i get home from work.... Fingers crossed that it will fire right up with out any major issues.

Its going to be a long day @ work! haha!

Fun Fun,
 
Ok, I am getting way closer to a 100% WORKING PINBOT NOW.....I installed the CPU board back in the pinbot and fired it up. I did not have much time to check it out but here is what is still wrong so far.

Only the first display seems to be working.. 2,3,4 and the credit display are all dark.

Sound works but voice seems to be way too low in volume.

I hope to look into these issues this afternoon.

Fun Fun,
 
I also wanted to see what others have done as far as upgrading the speakers on their pinbots?

Also, @ lunch (working graveyard) today ..... I checked some connections on the sound and also the displays and still have the same issues...

(only disply #1 is working) and the voice is very low but the music /s sound effects are normal.

FYI and thanks,
 
This has been quite a project for ya, you will get it working soon enough. At least it's not your only pinball machine, you do have others to play I see to get your fix.
 
Back
Top Bottom