Pinballs Fit - 99 Honda CR-V

louisurfer

New member
Joined
Jun 6, 2007
Messages
825
Reaction score
3
Location
Portola Hills, California
After seeing Troz pick up a Bally Corvette from me and amazingly saw that it fit inside a Honda Fit, I decided to give it a whirl. Decided to do it in my 99 Honda CR-V for a 420 mile round pick up on a System 11. The gas mileage in the CR-V is about 31% better than my Tundra (22mpg vs. 16mpg on fwy). I did some measuring on WPC and Sys11's, and then the spacial dimensions around the smallest points of the CR-V. Green light!.

To fit a modern pin in any vehicle you'll need about 30"w x 30"h x 52"deep to comfortably slide one in. (without taking off the head). You can probably go 28" x 28" x 52", but some things might rub on the interior.
 

Attachments

  • crv fits.jpg
    crv fits.jpg
    99.7 KB · Views: 37
Last edited:
Honda Element probably the best for hauling pins. Low deck, and a tailgate to boot.
 
Back
Top Bottom