pinball at the zoo in april, bringing tons of classic parts

monster kong

Well-known member
Joined
Apr 26, 2008
Messages
1,849
Reaction score
32
Location
California
Rating - 100%
13   0   0
pinball at the zoo in april, bringing tons of classic parts

me and a few collectors are bringing tons of parts for sale at this years pinball at the zoo.
you dont want to miss this show!

parts for classic vids and parts for pins as well.
we have a large collection of games and parts, way too much stuff to keep hanging onto.
the prices will be cheap, seriously. we dont want to take stuff back with us!

assume items need be rebuilt. most items were bought in lots over the years from operators, auctions, or games we parted out:

we have over 300 working games if that can give you an idea of our part collection.

partial listing:
19" MONITORS (untested but complete...assume they need cap kits at least) (over 40 total) G07, 4900, 4600, v1000, k6100, v2000, g05, g08, cinematronics, etc... including vector black and white and color xy.

tons of chassis and hv units for monitors (rgb and vector b/w and color as well).

*CONTROL PANELS-- a bunch of them. (tempest, ms pac man, tron, etc)
*BEZELS- glass and plexi style- at least 50 of these (donkey kong, defender, tapper, joust, etc).
* atari transformer blocks- over 30 of these.
*POWER SUPPLYS (well over 50)- linear for all the midway, atari, williams , stern and more ...games.
coin boxes and coin doors galore (nintendo, atari, midway, williams, stern, etc etc etc).

there is way more stuff, that is just to give you an idea.

http://www.pinballatthezoo.com/
 
Between Fudd and myself , we'll probably clean you out of monitors. Thanks for bringing a nice selection of parts. Now I have to figure out how to get to your booth before Fudd ;.)
Aaron
 
Ooh, I wasn't planning to go to this year after being dissappointed with last year's turnout (I think it was the same day as bigger pinball event somewhere else in the state), but you just changed my mind. I'd love to pick up a monitor! :)
 
Last year the Michigan Pinball Expo and Pinball at the Zoo were the same weekend. This year you can do the Expo the 12-15th and PATZ 20-21.

I'm gonna try to grab a monitor or two from you as well!
 
ive also got some 25" med res and 27" med res monitors.
a wg k7500 27 inch med res was just recapped and rebuilt. looks great.
i can bring that/those too if sale premade.

also have a 27" flat screen VGA wg d9400. it was new 3 years ago in a tokyo drift.
it failed a few months back (dead) i pulled it and threw in a lcd in the game.
ill sell it for $90 as is. tube and chassis are clean.
 
Hopefully you guys don't snag all the monitors first...I've been thinking of converting my MAME cab back to a JAMMA cab and could use one :D
 
we also will be briging lots of metal trim pieces for dedicated cabinet and monitor brackets (like sanyo/nintendo dk brackets), galaga /pac brackets, etc).
plus, lots of marquee metal brackets, control panel brackets, and other metal trim used on classics...
a whole bunch...and priced right!.
same with speaker grills, clamps, coin doors, and anything else.
 
one month away guys, brining lots of NOS pin parts, used pin parts, tons of vid parts...
good stuff:)
 
looks like ill also be bringing some project classic games as well, the prices will be right..
going through mega parts this week to get ready.
you dont want to miss this years zoo!
 
got some parts ready today. working on more tomorrow to get ready.
partial list of todays ready to load:
4600 monitors (more than 10)
wg6100 color xy monitors (more than 4)
G07 monitors (more than 10)
cinematronics monitors (4)
G07 and 4900 chassis (more than 20)
control panels compelte- tempest, donkey kong (4), asteroids (4), ms pac man (3) pac man (3), defender, tron (4), galaga (2), battlezone (2), etc.
coin doors (more than 20 atari), nintendo
coin buckets (metal and plastic to dedicated games midway, atari, williams, etc).
pinball legs- at least 30 of them or more)

working on more tomorrow, this is just a sample...
 
Anyone from the east side of MI going? I was going to head out sat morning maybe even Friday. If anyone's going I'm at 94/275 area if anyone wants to car pool let me know.
 
got some parts ready today. working on more tomorrow to get ready.
partial list of todays ready to load:
4600 monitors (more than 10)
wg6100 color xy monitors (more than 4)
G07 monitors (more than 10)
cinematronics monitors (4)
G07 and 4900 chassis (more than 20)
control panels compelte- tempest, donkey kong (4), asteroids (4), ms pac man (3) pac man (3), defender, tron (4), galaga (2), battlezone (2), etc.
coin doors (more than 20 atari), nintendo
coin buckets (metal and plastic to dedicated games midway, atari, williams, etc).
pinball legs- at least 30 of them or more)

working on more tomorrow, this is just a sample...


Bringing any Nintendo wooden coin buckets by chance?
 
Back
Top Bottom