Pin-Bot Bulb replacement

crumpybumpy

New member
Joined
Sep 19, 2010
Messages
8
Reaction score
0
Location
New Jersey
Hello--I am new to pinball maintenance so please pardon this noobish question:

One of the flasher bulbs on the upper left playfield of my pinbot is burned out and needs to be replaced. It is encased in a yellow cap--please see pic below.

How do I get to this bulb after removing the playfield glass? Does that whole assembly have to be taken apart or do those yellow caps come off? If that assembly has to be taken apart that looks like a major task....Thanks.
 

Attachments

  • burntbulb2.jpg
    burntbulb2.jpg
    92.3 KB · Views: 24
Thank you for the quick reply. Any tips on how to do this? The ramp seems to be interconnected with everything else on that section of the play field.
 
Does anybody have a good diagram of which flashers are the #1251 lamps and which are the #89's? I am working on putting my playfield back together after stripping it to clean and wax and didn't even think to pay attention to these differences when I was taking everything apart. I know I have a few lamps that weren't working before that I want to troubleshoot (the right eye lock, the 4 under the visor, etc) once it's all back together but now I'm not sure which bulb to put where because the manual doesn't really have these diagramed.
 
Back
Top Bottom