picture to large on kortek chassis ki-2-vo

sebby59

New member
Joined
Jan 30, 2009
Messages
2
Reaction score
0
Location
lille, nord, France
Greetings from France.
And sorry for my bad english.

I have just find a old english arcade cabinet with a kortek chassis.
it 's writed ki-2-vo on it.
Look like a clone of si-325 sharp image or kmf.

The picture on the monitor is pretty fine.

The only problem is that the picture is just too large for the screen.
1 inch of image is missing at the left and right of the monitor.

i have tried to turn the width button on the remote controler of the chassis, but the image don't stretch enough , and it pinch the center.

Before taking out the chassis and replacing all caps, i'm looking forward for some good advices.

Thank you very much if you know how to solve the problem !
 
Many Kortek monitor chassis have a width range jumper wire on the main board. You can move this jumper from WIDER to NARROWER. Be sure to have the power to the monitor turned off when you move the jumper from one post to the other.
 
Back
Top Bottom