Picture off Screen with iCade

ssppllaatt

New member
Joined
Oct 5, 2010
Messages
13
Reaction score
0
Location
UXBRIDGE, Middlesex, United Kingdom
I have an icade 60 in 1 board fitted inside a Table Arcade Game

The board is connected to the internal wiring loom (Konami Classic) via an adapter supplied by jammaboards.com

The problem I have is that on some games the very top of the screen is missing (1/2 of the score in Galaga for example) and that the very bottom of the screen is always blank.

This is not the case with a Konami Classic board such as Scramble

Is this something that can be adjusted for on the monitor?

Has anyone else had this problem?

All help appreciated
 
You can try adjusting the monitor. I have seen a similar problem (with 60-in-1 pcb) that I was not able to adjust out so an LCD monitor was installed in place of the arcade CRT monitor.
 
Post a pic of what you have so we can help...

Oh, and tell us what model monitor chassis you have...
 
Pictures of my screen and setup

Here are some pictures showing the problem and my setup

The Monitor has a 'HITACHI' label on it and a Japanese label that I assume is a warning. Cant see a chasis number
 

Attachments

  • iCade Screen P1 180.jpg
    iCade Screen P1 180.jpg
    31.2 KB · Views: 51
  • Galaga P1 Cocktail 180.jpg
    Galaga P1 Cocktail 180.jpg
    19.3 KB · Views: 44
  • Galaga P2 Cocktail 180.jpg
    Galaga P2 Cocktail 180.jpg
    87.6 KB · Views: 37
  • Monitor 1 180.jpg
    Monitor 1 180.jpg
    33.2 KB · Views: 34
  • Monitor 2 180.jpg
    Monitor 2 180.jpg
    32.9 KB · Views: 33
Looks like a Toei monitor. You'll have to get to the controls to see if any are labeled Horizontal Position. If not, then look for a Horizontal Shift jumper...
 
iCade Monitor Position

Thanks - I can see a bunch of controls but none of them and have carefully turned them to see what they do but none of them move the picture south.

May just have to live with it
 
Picture off Screen

I have the same problem but with a Wells Gardner monitor K9 (something) series. It was installed vertically in an original Jungle King cab with the icade board. I can move the image up or down, but I really need to "squeeze" so overall vertical size is about an inch shorter. No adjustment achieves that on the monitor. Any suggestions?
 
Post a picture of your screen, and positively identify your entire monitor model....
 
Back
Top Bottom