Picture of Tron optical encoder board in place needed.

liquidx

New member
Joined
Apr 16, 2008
Messages
65
Reaction score
0
Location
Anderlecht, Brussels
Picture of Tron optical encoder board in place needed.

Hi,

I'm restoring a Tron but the spinner isn't working. This is because the encoder board was hot glued perpendicular to the back of the control panel and has come loose.

I'm assuming this is not how it was supposed to be attached. From the look of it, some type of bracket/support was used.

I've tried to find a photo of the back of the control panel so I can get an idea of what I should be doing to fix this but have had no luck.

Does anyone have a photo of this or know where I can find one?

Thanks very much!
Colin
 
Back
Top Bottom