Picture of a Sanyo EZ chassis

KidVidiot

Thread Manager
Joined
Aug 9, 2011
Messages
7,646
Reaction score
525
Location
Los Angeles, California
Can someone post a picture of a sanyo ez chassis from a couple angles hooked into the monitor?

I did a cap kit on the one in my converted Mario Bros tonight and Im not certain i put it all back together right. Of course, the game didn't work beforehand so I'm not certain I didn't put it back together right either.

So now I flip the power switch and all that happens is some kind of glow/light from somewhere on the chassis (not the monitor tube).

Frustrated.
 
I can snap some when I get home from work. They are a reall PITA to remove and then hook back up thats for sure.
 
Thanks. I think tonight or tomorrow I'm going to pull out my donkey kong 3 monitor and swap it into mario to see if it works at all. The wiring harness in the mario is really hacked to s**t, really sloppy. What would be the best replacement wiring harness to look out for? I believe the mario was originally a popeye, if that matters.
 
got everything hooked up correctly, still wasn't getting anything, thought it might be the fuse, ended up making the fuse explode when i tried to pull it out, gave up for the night.
 
Back
Top Bottom