darinjacobs

Well-known member
Joined
Jan 28, 2009
Messages
3,474
Reaction score
1,162
Location
Crown Point, Indiana
Centipede cabaret side art, looking for additional interest http://forums.arcade-museum.com/showthread.php?t=242314

Pacman cocktail glasses, delayed until October 1st due to a glass supply issue. I have a long list of people who are waiting for this. Im very sorry. it is out of my hands.

TRON upper and lower control panel plastics delayed until October 1st. The original printer I used for this quoted me a much higher price than the original run. So I shopped around and found several places that could do this much cheaper but the tolerances were not up to snuff. We would end up with plastics that wouldn't fit too well like plastics out in the market for other machines. So I found this place in Chicago that was priced well and their tolerances were exactly what I needed. So I sent the films off two months ago and I get a call Monday to tell me they made a mistake in their quote and it's now higher than the reprint quote from the original printer. I asked for the film to be sent the original printer and they confirmed receipt today and ordered materials. What a nightmare. Even though my cost is higher now I'm gonna hold the original price where it was. But I will probably never print these again.

Baby Pacman cpo reprint is now delayed until August 15th. That's only a 3 week delay, which isn't too bad.

Lunar Lander marquees and side art. Seemingly delayed forever, I know. But Rich tells me he is working hard on these. Says he will be ready to ship after CAX is over.

MsPac, Galaga, Pacman bezels should be shipping 2 weeks after CAX according to Rich.

Slugfest bleacher plastic should be ready Sept 1st

Looking into reprinting System1 side art as Im about to run out.

Return Of The Jedi and Black Widow marquees will likely be done by Rich. Need to talk timelines with him.

Thanks!
 
Centipede cabaret side art, looking for additional interest http://forums.arcade-museum.com/showthread.php?t=242314

Pacman cocktail glasses, delayed until October 1st due to a glass supply issue. I have a long list of people who are waiting for this. Im very sorry. it is out of my hands.

TRON upper and lower control panel plastics delayed until October 1st. The original printer I used for this quoted me a much higher price than the original run. So I shopped around and found several places that could do this much cheaper but the tolerances were not up to snuff. We would end up with plastics that wouldn't fit too well like plastics out in the market for other machines. So I found this place in Chicago that was priced well and their tolerances were exactly what I needed. So I sent the films off two months ago and I get a call Monday to tell me they made a mistake in their quote and it's now higher than the reprint quote from the original printer. I asked for the film to be sent the original printer and they confirmed receipt today and ordered materials. What a nightmare. Even though my cost is higher now I'm gonna hold the original price where it was. But I will probably never print these again.

Baby Pacman cpo reprint is now delayed until August 15th. That's only a 3 week delay, which isn't too bad.

Lunar Lander marquees and side art. Seemingly delayed forever, I know. But Rich tells me he is working hard on these. Says he will be ready to ship after CAX is over.

MsPac, Galaga, Pacman bezels should be shipping 2 weeks after CAX according to Rich.

Slugfest bleacher plastic should be ready Sept 1st

Looking into reprinting System1 side art as Im about to run out.

Return Of The Jedi and Black Widow marquees will likely be done by Rich. Need to talk timelines with him.

Thanks!

i'd like to see ya get yer hands on Stun Runner art.... Good LUCK !

:D


END OF LINE.


Daniel.
 

We're the ones who should be saying thanks :D:cool:!

Now having said that do you think there's even a slight chance of Food Fight bezels or marquee's being screened on glass? It seems like the art hasn't sold well so I'm assuming the chance of buying screened glass bezels and/or marquees is quite slim at this point :(.
 
We're the ones who should be saying thanks :D:cool:!

Now having said that do you think there's even a slight chance of Food Fight bezels or marquee's being screened on glass? It seems like the art hasn't sold well so I'm assuming the chance of buying screened glass bezels and/or marquees is quite slim at this point :(.

I need more sales of the side art to get these started.
 
Any update on when you can do the Tapper bezels?

I need sales of the marquee to pickup to get going on those. The art can get done quickly. The mirroring is expensive and hard to print with. But that wont stop me. Only slow sales of Tapper marquees.
 
I know your doing tons of cool stuff, here's some things i'd like to see someday.

Atari XO football cardboard bezels
Gravitar sideart
Gravitar overlays
Space duel sideart
Bagman plastic cpo's
Bump n jump sideart bezels marquees
 
If we are making wish list thennnn

how about someone make a nice repro wood grain for the cabarets?? hummm most the stuff ive seen on ebay and such just doesnt add up. Just had to put that out there...
 
If we are making wish list thennnn

how about someone make a nice repro wood grain for the cabarets?? hummm most the stuff ive seen on ebay and such just doesnt add up. Just had to put that out there...

+1.

Hell, full-sized sheets of good woodgrain could serve a bunch of us.
 
I would be in for these as well:

Atari XO football cardboard bezels

Gravitar sideart

Gravitar overlays

Bagman plastic cpo's
 
Baby Pacman cpos back in stock. All back orders have shipped. Thanks for your patience.

If I knew exactly what type of veneer was on the early games I would buy it in bulk and resell. Ideas?
 
Back
Top Bottom