Phoenix - corrupted graphics

westal_sage

Member
Joined
Sep 9, 2011
Messages
188
Reaction score
4
Location
Texas
Picked up a Phoenix awhile back and just getting around to tightening things up. The main problem I've noticed is that the graphics sometimes mess up - here's what's happening:

On the initial 2 boards with the smaller birds, there seems to be 1 bird that is "stuck" on the screen. If you shoot all the other birds it will come down to the last bird that you can hear flying around and see its bullets, but either you can't shoot it or I just haven't been lucky to shoot it blind. When you get killed, things go back to normal and you'll be able to see and shoot that last bird like normal, and go on to the next level.

If I move the boards around, I can make the problem go away. So I'm suspecting the ribbon cables that connect the 2 boards are faulty.

Just wondering if anyone is familiar with this issue. Also, anyone know of someone who sells or might could make these ribbon cables to sell me? Thanks as always!! -Wes
 
Back
Top Bottom