Pentranic ID help

FlashbaxArcade

Active member
Joined
Jun 2, 2009
Messages
1,521
Reaction score
11
Location
Burleson, Texas
i have a 25" Pentranic that im trying to fix....goin to get my rejuv at shop later but i dont think im gettin a certain color(maybe red but got some when i used red pot on neckboard). not real sure just have color/contrast off!

this thing look really new and can't find a model # anywhere.....here's a pic to ID please. since this has to be a new monitor, should it need a capkit? is so does anyone know what caps/capkit it is?

hopefully tube is ok....which i will ck later with rejuv.
 

Attachments

  • SDC10935.jpg
    SDC10935.jpg
    87.3 KB · Views: 4
  • SDC10936.jpg
    SDC10936.jpg
    88.9 KB · Views: 4
  • SDC10937.jpg
    SDC10937.jpg
    91.9 KB · Views: 4
  • SDC10938.jpg
    SDC10938.jpg
    91.2 KB · Views: 4
ok...tube appears to be all good per rejuvenator! still is discolored a bit though so i'm guessing it has to be a cap???

also, there is a small connector that is connected on pcb but not onto anything else(3 or 4 inch harness)...just hangin! can't see where it, or if it plugs up???
 
Well, I just answered this in your other post. Go read it there, but disregard answer #1: :D
 
it is a 25" Pentranic CH-288 with color issues! anyone know a capkit i can get?

or just caps that could produce color problems?
 
Back
Top Bottom