Pentranic 1432

Pinball Wizard

Well-known member
Joined
Sep 20, 2010
Messages
3,084
Reaction score
407
Location
Baltimore, Maryland
I have a Pentranic 1432 monitor that suddenly died on me. It has nothing working on it, and it sounds like the relay on the chassis is clicking over and over again, suggestions?
 
i don't know anything about thoes chassis.
but it sounds like your H.O.T is shot.
cap it wile you have it out.

Peace
Buffett
 
i have heard them chirp and tick and kinda squeal.
and after i tested all of them they were bad.

so test and see i bet you its shorted.

Peace
Buffett
 
I got a chance to check it last night, and the HOT is shorted out across the outside 2 legs. Just have to order and replace it. Thanks.
 
it will always be shorted between those two.

did you measure it from the center leg to each outside leg.
black lead on the center leg.
red to the outside legs.

Peace
Buffett
 
Duh, your right. My mind wasn't on last night. HOT tests good. Thinking about replacing the relay, as it is right after the main fuse and it sounds of death.
 
Back
Top Bottom