Pentranic 1019 CH-201 Cap List Discrepency

[Mat]

I have 19" Pentranic monitor. A sticker on the chassis identifies it as model # 1019. "CH-201" is printed on the PCB. About a year ago I started to install a cap kit. About halfway through I realized that the cap kit I purchased contained many of the wrong caps.

I finally got back to it today and wrote down a list of all the caps on the chassis. It turns out this chassis has different caps than either the 1019 or PC-1019 listed here:

http://www.juniorsrevenge.com/pentranic1019caplist.txt
http://www.juniorsrevenge.com/pc1019caplist.txt

These are the caps on my chassis:

C101 100µF 25V
C102 100µF 25V
C103 100µF 25V
C107 100µF 25V
C201 1µF 50V
C307 47µF 16V
C309 33µF 25V
C310 100µF 50V
C313 4.7µF 250V
C314 1µF 160V
C404 4.7µF 50V
C407 47µF 16V
C418 100µF 200V
C425 100µF 100V
C427 4.7µF 250V
C429 1000µF 50V
C505 390µF 250V
C506 1µF 160V

Info on these monitors seems to be pretty limited. Has anybody run across one of these chassis before?

 

[KenLayton]

Talk to Rick Nieman at niemandisplays.com

 

[Mat]

Talk to Rick Nieman at niemandisplays.com

Thanks for the reference. I'll contact him if I hit a brick wall on this monitor.

I went to a local electronics shop and picked up the remaining caps. I replaced all of them except the filter cap. It looks pretty decent now except that it's a little blurry. It's ok with the brightness turned all the way down on the remote board but gets blurrier as the brightness is increased.

 

[modessitt]

Submit your list to my site so I can verify it and include or correct as needed...

 

[KenLayton]

Is that really a Pentranic? I've never seen one.

It sure looks a lot like the early Eygo:

http://homearcade.org/BBBB/eag.html

 

[Mat]

Is that really a Pentranic?

The label identifies it as such.

 

[Mat]

I found this on Bob Roberts' site. It explains why this chassis is such an oddball.

http://homearcade.org/BBBB/ch-201.html

 

[jjhudgins]

I have 19" Pentranic monitor. A sticker on the chassis identifies it as model # 1019. "CH-201" is printed on the PCB. About a year ago I started to install a cap kit. About halfway through I realized that the cap kit I purchased contained many of the wrong caps.

I finally got back to it today and wrote down a list of all the caps on the chassis. It turns out this chassis has different caps than either the 1019 or PC-1019 listed here:

http://www.juniorsrevenge.com/pentranic1019caplist.txt
http://www.juniorsrevenge.com/pc1019caplist.txt

These are the caps on my chassis:

C101 100µF 25V
C102 100µF 25V
C103 100µF 25V
C107 100µF 25V
C201 1µF 50V
C307 47µF 16V
C309 33µF 25V
C310 100µF 50V
C313 4.7µF 250V
C314 1µF 160V
C404 4.7µF 50V
C407 47µF 16V
C418 100µF 200V
C425 100µF 100V
C427 4.7µF 250V
C429 1000µF 50V
C505 390µF 250V
C506 1µF 160V

Info on these monitors seems to be pretty limited. Has anybody run across one of these chassis before?

@security0001 Do you have this? I ordered the 1019 19" color monitors on you site but it doesn't match this at all.

 

[security0001]

@security0001 Do you have this? I ordered the 1019 19" color monitors on you site but it doesn't match this at all.

i would need to have your complete cap list values and locations emailed to me from our site and i can check as there are just so many variations.

 

[jjhudgins]

The correct ones for this version are posted above in this thread. I had enough to cover the job.

 

[security0001]

The correct ones for this version are posted above in this thread. I had enough to cover the job.

this is the correct kit for that list above and i updated the site to include CH-201 to help searching for it.

Eygo 53210-607 / 1520H-G07 EARLY VERSION Monitor Cap Kit 105C Nichicon - Arcade Parts and Repair

Eygo 53210-607 (EYGO 53210-G07) (also known as the 1520H-G07 EARLY VERSION) (One of many sometimes found as a G07 19″ import replacement chassis) arcade Monitor Cap Kit 105C 100% Nichicon Capacitors.

www.arcadepartsandrepair.com