Well I was damned near complete with this with the exception of the control panel and picked up a huo machine so this is up for sale.
Price 400 or trade for stuff in my sig or make trade/$ offers.
It was a trivia whiz that I was converting back.
Monitor works and looks good has trivia whiz burn.
Cab is in pretty good shape. Typical lock bar holes on the front. Corners are in good shape. The lower kick board is missing a chunk - probably happened during being moved during its tour in the wild. The upper left side as you can see in the pics has a good scrape that was painted over.
It has the main harness and it works. I replaced p10 and p2 with molex connectors I just never got around to completing the other side as I was trying to find a cp with no extra holes.
Original power supply works.
Board is a revision b and works.
Control panel. Cp has extra holes could be welded up. I have a joystick the correct small shaft red ball. Buttons are nos.
Art. It has a marquee that is in good shape but could use a polish to be perfect. I have art that I got from tog that includes a bezel and a cpo. The stuff they reproduced is pretty awesome. No side art.
Wasn't sure whether to post this here or on the parts side but figured I would try here first. Keep in mind the art is 150 alone. I would rather sell this to someone to complete so for now this is only available as a package. If you are interested in parts you can send me a pm with offers but I am going to wait at least two weeks per the rules and probably longer before I go that route.
Price 400 or trade for stuff in my sig or make trade/$ offers.
It was a trivia whiz that I was converting back.
Monitor works and looks good has trivia whiz burn.
Cab is in pretty good shape. Typical lock bar holes on the front. Corners are in good shape. The lower kick board is missing a chunk - probably happened during being moved during its tour in the wild. The upper left side as you can see in the pics has a good scrape that was painted over.
It has the main harness and it works. I replaced p10 and p2 with molex connectors I just never got around to completing the other side as I was trying to find a cp with no extra holes.
Original power supply works.
Board is a revision b and works.
Control panel. Cp has extra holes could be welded up. I have a joystick the correct small shaft red ball. Buttons are nos.
Art. It has a marquee that is in good shape but could use a polish to be perfect. I have art that I got from tog that includes a bezel and a cpo. The stuff they reproduced is pretty awesome. No side art.
Wasn't sure whether to post this here or on the parts side but figured I would try here first. Keep in mind the art is 150 alone. I would rather sell this to someone to complete so for now this is only available as a package. If you are interested in parts you can send me a pm with offers but I am going to wait at least two weeks per the rules and probably longer before I go that route.
Last edited:
