PCB's - Hypersports T&F Spy Hunter Tron Mario Bros

cdjump

Well-known member

Donor 6 years: 2011, 2013, 2016-2017, 2019, 2023
Joined
Aug 10, 2007
Messages
3,507
Reaction score
1,621
Location
Cordova, Tennessee
Rating - 100%
73   0   1
PCB's - Hypersports T&F Spy Hunter Tron Mario Bros

I have several extra pcb's that i've repaired for sale.
All are repaired, tested, burned in, and play tested.
Hypersports - $150 2 available.
Track and Field - 75. 5 or 6 available.
Tron - 185 2 available, have a few more i can repair if need be
Spy Hunter - 135 Upright 150 cockpit. Several available.
Punch-out- 150 repaired and tested, new batteries.
Bally 2518-133/35 MPU's Clean - no corrosion - hard to find in this condition 135 each. Roms of your choice (baby pac, granny and the gators, or pins that use this mpu).
All prices plus shipping. Regular PP is preferred. In general, shipping on the mcr pcbsets runs 15 dollars, and the smaller stuff 10.00 to the contiguous 48.
Buy any 2 pcb's and i'll throw in shipping.
Normally i ship UPS ground to the 3 day from here zone, and Priority mail anywhere that UPS takes longer. I also do my very best to ship out as soon as possible. The UPS hub is right up the street from my house, so i drop all UPS orders off directly at the hub. USPS takes an extra day as i have to schedule a pickup.
Satan's Hollow with repairs on ssio - 135.
I can also repair most of the above pcbs, or exchange yours for a working one.
 
Last edited:
Can the Hypersports be swapped into a regular T&F?

yes.

I am working on building a second pcb holder in my hyper sports cab, so I can have both boards in there, and just change the wiring harness from board to board depending on what I want to play.

I am pretty sure there is no way putting hyper sports roms on a track and field board will work.
the boards are way different.
 
Hypersports and Track and Field have the same pinout, and can be used in the same cab with no modifications whatsoever. However, the pcb's are vastly different, to the point of using different custom chips. HS roms will not work in a T&F pcb. If they did, i'd have 8 HS's for sale.

As far as upside down characters - no, it wouldn't be a rom swap to fix the issue most likely, and fwiw, without schems, i wouldn't even look at a bootleg to repair it, its just too much hassle.
 
all pms replied to, i think. If i missed anyone, please send me another one.
 
I just finished repairing a Satan's Hollow, and another Tron.
Satan's Hollow. Works 100%, but has several repairs on the ssio. 135 + shipping.
 
added Punch-out to the list. Have 2 available. One still needs to have a battery holder installed, but is tested working besides that.
 
Back
Top Bottom