FS Parts: PCB's for sale- tempest - omega race - Kosmic Krooz'r

tester007

Well-known member
Joined
Jan 14, 2007
Messages
2,609
Reaction score
43
Location
Calgary, Alberta, Canada
Rating - 100%
15   0   0
PCB's for sale- tempest - omega race - Kosmic Krooz'r

No time really to work on things right now so selling some of this stuff off.

2 x complete Tempest pcb's. One does not work, and I have not separated the boardset to see if aux or main works on it's own. Eproms on both sets verified, one missing on this dead set. One set seems to work fully, but resets in attract when the word 'Tempest' comes out of the screen. Someone suggested trying a new bitslice through the 4 slots on aux to see if that changes it but I have had no time to do so. $150 for the pair plus ship.
 

Attachments

  • temp1.jpg
    temp1.jpg
    101.6 KB · Views: 25
  • temp2.jpg
    temp2.jpg
    101.8 KB · Views: 26
5 x Omega Race pcb's plus 2 sound pcb's.
- 2 of the pcb's are absolutely mint, non-working.
- one has slight acid damage, and I marked it as playing blind but I seem to recall it was chirping but not running well last time I tried although this could have been my test sound card as my keeper pcb is doing something similar now.
- one has acid damage, lots of trace work done with wire to fix, had some sort of life now I seem to recall but consider non-working.
- Last one I have had for ages and is missing parts so I do not recall condition but consider non-working.

I can send close-up pics to interested parties but from general observation today:

- 64 brand new 2114 rams on these boards (1 pcb has them soldered on direct but they are all new).. this alone is worth $65 at least.
- 3 board sets are missing the prom pairs at st/7, 3 missing single prom at g6
- 14 eproms missing, but I am throwing in 14 eproms to program.
- 1 processor missing
- 4 missing BBU ram @ s4
- 1 missing the 2 AD561's (can be found fairly cheap on ebay out of china.. I have tested from them and they work)
- Some logic missing, mainly on the last pcb listed.
- both sound pcb's non-working
- 3 pcb's have new processors, all existing eproms verified, and boards have MANY new sockets and/or logic, regulators, caps..etc..etc...

Would like $250 plus ship for the lot.
 

Attachments

  • or1.jpg
    or1.jpg
    98.4 KB · Views: 25
  • or2.jpg
    or2.jpg
    100.7 KB · Views: 17
  • or3.jpg
    or3.jpg
    100.4 KB · Views: 17
Last edited:
Kozmic Krooz'r boardset. The lose eprom on top is one of the sound eproms that did not verify. All other eproms in the set verified. I burned a new sound eprom and tried to get this boardset working in a Tron cab. I grounded the purple wire off the power supply as I read the pcb needs that signal to boot the pcb, however I could never get it to boot. I do not know if it is possible to boot in a Tron cab either. All that would come up would be a green grid, with some random sprites on the screen. If I took off the ground to the purple wire, I got a solid color screen (I think I did.. It's been a few months although I know it was different than grounded).
I took my working Tron boardset and swapped in 2 pcb's with the KK sound pcb, and swapped over the eproms from KK to the 2 Tron boards. I got the same green grid and sprites. So although this is no guarantee, I would guess the issue is on the sound pcb for the KK as both the Tron pcb's were working, and only had the verified KK eproms swapped over. I did not test the 2 KK boards in my Tron with Tron eproms. I am assuming that since the 2 KK pcb's give the same green grid and sprites as the 2 working Tron pcb's with KK eproms on them, that those 2 pcb's possibly are functioning, but that has not been verified.

Would like $100 plus ship.
 

Attachments

  • kk1.jpg
    kk1.jpg
    106.2 KB · Views: 26
  • kk2.jpg
    kk2.jpg
    93.6 KB · Views: 16
Hi Mr. Fixit. I forgot about this post, and you replying bumped it up, and I have a few people looking to buy all of them, which I prefer to do than ship singles.
thanks
 
All the Omega Race pcb's and Tempest pcb's now sold. Have the Midway pcb's, but also a tested working Wild Western (or can make it a working elevator action) pcb.
 
Back
Top Bottom