PC10 Control Inputs

ToplessZ

Well-known member

Donor 11 years: 2011, 2013-2022
Joined
Oct 25, 2006
Messages
1,652
Reaction score
27
Location
Claremore, Oklahoma
I have a (im guessing) single monitor PC10 board, (has one 56 pin edge connector).

I was able to wire myself up a jamma adapter using mikes inverter board for the video and sound, so I have a good picture . Problem Im having now is I can get any control inputs to register. Does the PC10 board act like any other normal PCB and require you to ground out the input to make a button press? Im hoping not else there is something wrong with my board since I cant get it to do anything other than power up. I got it here so hopefully it doesnt have issues..

Anyone else have an issue like this on the PC10 board before that has a quick fix like, its a short on this thingy-ma-jig?
 
Last edited:
I've converted vs unisystem stuff before which is closely related and it was all very straightforward as you are expecting. Single common ground for controls.
 
Ahh ok, then this is a dual monitor board. That's why is has sred, sgreen, sblue and also mred, mgreen, and mblue pins.
I only have the S pins connected right now so I'm only seeing one screen , the menu screen with the list of games .
 
You should be able to select the different games, then hit start and the screen will change to the instructions for that particular game. It's all extra buttons, though, so you'll have to wire up however they are on the edge connector to try it out.
 
Back
Top Bottom