Party Animal Pinball Machine

Batigirl61

New member
Joined
Jan 27, 2011
Messages
7
Reaction score
0
Location
New Jersey
Looking for the ramps and decals for PARTY ANIMAL 1987 (BALLY). If you have any other parts as well, please let me know.

Batigirl61
 
Last edited:
Need Party Animal Decals + Ramps

I sent an email already, let's see what happens.

I am new to the pinball world... This is my first machine. Any other tips will be greatly appreciated.

Thanks

Batigirl61
 
You've got a machine that not a lot of repro anything was made so you're semi stuck in options. BTW - if you don't hear from Steve be persistent and keep emailing him.

Any artwork that WAS available for people to recreate their own artwork with was hosted on pinballrebel.com. The site owner received a C&D letter from the former jerk wad Williams license holder so he had to remove all the artwork.

About all I can advise is you get on RGP and mrpinball.com and post a WTB.

Good luck on your search.
 
I have a set of used ramps, would have to dig them out though, also have a 6803 power supply board, and a couple flipper rebuild kits.
 
you've got a machine that not a lot of repro anything was made so you're semi stuck in options. Btw - if you don't hear from steve be persistent and keep emailing him.

Any artwork that was available for people to recreate their own artwork with was hosted on pinballrebel.com. The site owner received a c&d letter from the former jerk wad williams license holder so he had to remove all the artwork.

About all i can advise is you get on rgp and mrpinball.com and post a wtb.

Good luck on your search.

thank you very much! I will keep looking and let you know if i find anything...
Batigirl61
 
I have a set of used ramps, would have to dig them out though, also have a 6803 power supply board, and a couple flipper rebuild kits.

I definetely need the flipper rebuild kits and ramps, specially the center and left ramp. I will check to see if the PS Board is working properly. In the mean time, please send me some pictures of the ramps at [email protected]. Also, let me know on your email how much you are asking for this...

Thank you very much for your help Sir.

Batigirl61
 
I definetely need the flipper rebuild kits and ramps, specially the center and left ramp. I will check to see if the PS Board is working properly. In the mean time, please send me some pictures of the ramps at [email protected]. Also, let me know on your email how much you are asking for this...

Thank you very much for your help Sir.

Batigirl61

I will take some photos this evening and send them your way,
along with more information on the other parts I mentioned I had.
 
Back
Top Bottom