parts like this?

Joined
Jan 23, 2011
Messages
330
Reaction score
0
Location
Tennessee
hey, when i was tearing down my Street Fighter II playfield for cleaning and waxing, of course some stuff broke. anyone know where someone could purchase this stuff?



the top part is just like some kind of sheet metal nut, about half of mine are nice and shiny. half are crusty like this one, if im going thru the trouble why not get some nice ones right?

next is the screw/bolt that it i broke, the other part is the fastener that it secures to thru the play field. is there a site that sells these?
 
ace hardware sells the t-nut

any of the decent pinball places sell the post. measure yours so you dont buy the wrong ones

acorn nuts can be bought too
 
how did you guess lindsey? haha i broke a few on my bally night rider aswell.

the problem for me is on my gottlieb it uses the acorn nuts. i dont see the stud i need on their site. the threads for the part going through the playfield to the t-nut are 6/32", but the acorn nut will not thread on the 6/32" thread. they appear as they were not threaded on that end at all until the acorn nuts were installed. any suggestions? or do i have to convert?
 
If you have part numbers "Steve young at www.pbresource.com" has tons of parts that aren't listed on his webbsite.
 
If you have part numbers "Steve young at www.pbresource.com" has tons of parts that aren't listed on his webbsite.

part numbers arent listed in the game manual.... which is frustrating, because i know part numbers are important, i placed an order with action pinball.
 
Back
Top Bottom