FS Parts: Parts in DFW

amr

Well-known member
Joined
May 31, 2006
Messages
2,303
Reaction score
40
Location
Texas, Texas
Rating - 100%
4   0   0
All prices do not include shipping (unless otherwise stated)

Tempest-to-Major Havoc conversion board - $100 + shipping (already boxed ready to go)

Cinematronics Star Castle sound board - $40 + shipping (was tested as working - been sitting in my parts store for years - no way for me to test now)

Bally Midway Omega Race control panel - $40 + shipping

Bally Midway Omega Race 2-way mirror (for the background art) - $40 + shipping (I'm always weary of shipping glass - take your chances)

Atari Tempest marquee - $40 + shipping
Atari Space Duel Board (partially working) - $50 + shipping
Atari Space Duel monitor bezel (the dark plexiglass cover) - $35 + shipping (I don't mind shipping plexi - should be ok.)

Taito Cadash PCB (working) - $100 SHIPPED
Taito Cadash PCB (partially working) - $40 + shipping (has a ROM error)

Atari Gauntlet 2-Player control panel overlay (new/old stock) - $40 shipped
Wintron flyback for Atari Amplifone monitors - $100 SHIPPED - (I have no way to test this - it was a working pull)
Electrohome black/white vector monitor (I think it's working - it's been years since I touched it) - $100 + shipping - this is a big heavy monitor and I do not have a proper monitor box to pack it in so local pickup is prefered.

Nintendo Popeye control panel overlay (looks great) $30 + shipping
Stern/Seeburg Rescue game board (2H ROM error) - $40 + shipping
iPAC2 board - $30 SHIPPED
WG 6100 Monitor Chassis - $75 shipped - UNTESTED
New set of Tron ribbon cables - $15 + shipping (probably like $5 USPS?)
Atari Gravitar wiring harness (full) - $40 + shipping

Atari Road Blasters mother board and cart -$100 + shipping (bought AS working - no way to test.)
Omega Race wiring harness - $35 + shipping
Krazy Kong control panel overlay - $40 SHIPPED

Donkey Kong Jr. bezel - $30 + SHIPPING
Taito Rastan bezel

I will add pictures as I get a chance.


If you're local - I'll sell the entire lot for $700 (50% discount) - most everything is already boxed up and ready to go.
 
Last edited:
*P* = PENDING PAYMENT

All prices do not include shipping (unless otherwise stated.) I will combine shipping where I am able to.

Tempest-to-Major Havoc conversion board - $100 SHIPPED (already boxed ready to go)

*P*Cinematronics Star Castle sound board - $40 + shipping (was tested as working - been sitting in my parts store for years - no way for me to test now)

Bally Midway Omega Race control panel - $40 + shipping

Bally Midway Omega Race 2-way mirror (for the background art) - $40 + shipping (I'm always weary of shipping glass - take your chances)

Atari Tempest marquee - $40 + shipping
Atari Space Duel Board (partially working) - $50 + shipping
Atari Space Duel monitor bezel (the dark plexiglass cover) - $35 + shipping (I don't mind shipping plexi - should be ok.)

Taito Cadash PCB (working) - $100 SHIPPED
Taito Cadash PCB (partially working) - $40 + shipping (has a ROM error)

Atari Gauntlet 2-Player control panel overlay (new/old stock) - $40 shipped

Electrohome black/white vector monitor (I think it's working - it's been years since I touched it) - $100 + shipping - this is a big heavy monitor and I do not have a proper monitor box to pack it in so local pickup is prefered.

*P*Nintendo Popeye control panel overlay (looks great) $30 + shipping
Stern/Seeburg Rescue game board (2H ROM error) - $40 + shipping

iPAC2 board - $25 + SHIPPING (very small and light box.)
*P*WG 6100 Monitor Chassis - $75 shipped - UNTESTED
*P*New set of Tron ribbon cables - $15 + shipping (probably like $5 USPS?)

*P*Atari Gravitar wiring harness (full) - $40 + shipping

*P*Atari Road Blasters mother board and cart -$100 + shipping (bought AS working - no way to test.)

Omega Race wiring harness - $35 + shipping
Krazy Kong control panel overlay - $30 SHIPPED

Donkey Kong Jr. bezel - $30 + SHIPPING
Taito Rastan bezel -
Donkey Kong CPO - $35 + SHIPPING (bought this from TNT years ago.)
Qbert control panel - $50 + SHIPPING (unpopulated - still boxed from when I bought it years ago.)

Atari AR-II Test Harness - $35 + SHIPPING (I bought this from whomever was making these on KLOV - I don't remember how much these were originally.)
 
Last edited:
All prices do not include shipping (unless otherwise stated.) I will combine shipping where I am able to.

Tempest-to-Major Havoc conversion board - $85 + shipping (already boxed in a USPS Priority mailer ready to go)

Bally Midway Omega Race control panel - $35 + shipping

Bally Midway Omega Race 2-way mirror (for the background art) - $40 + shipping (I'm always weary of shipping glass - take your chances)

Atari Space Duel Board (partially working) - $45 + shipping
Atari Space Duel monitor bezel (the dark plexiglass cover) - $35 + shipping (I don't mind shipping plexi - should be ok.)

Taito Cadash PCB (working) - $90 SHIPPED
Taito Cadash PCB (partially working) - $40 + shipping (has a ROM error)

Atari Gauntlet 2-Player control panel overlay (new/old stock) - $40 shipped

Stern/Seeburg Rescue game board (2H ROM error) - $40 + shipping

iPAC2 board - $25 SHIPPED (already boxed and ready to go)

Omega Race wiring harness - $35 + shipping

Krazy Kong control panel overlay - $30 SHIPPED

Donkey Kong Jr. bezel - $30 + SHIPPING

Taito Rastan bezel -

Donkey Kong CPO - $35 + SHIPPING (bought this from TNT years ago.)

Qbert control panel w/overlay - $50 + SHIPPING (unpopulated - still boxed from when I bought it years ago.)

Atari AR-II Test Harness - $35 + SHIPPING (I bought this from whomever was making these on KLOV - I don't remember how much these were originally.)

Williams NVRAM mod (Spaeth kit) - $35 shipped. I have no idea how much this was originally - it's been a very long time.
 
Last edited:
Adding a part:

WG 19V2000 monitor - $100. This is a complete monitor I bought as a backup for my Omega Race (or Star Castle at the time.) I bought this as working years ago and never ever opened it until today. The monitor is complete and looks clean - I have no way to test it.

I highly recommend picking this up - the box it came in doesn't look like it can handle another shipping. The person I bought it from made a wood frame and cover for the tube that he mounted the monitor to to protect the tube (and it worked perfectly.)
 
Tempest-to-Major Havoc conversion board - $85 + shipping (already boxed in a USPS Priority mailer ready to go)

Bally Midway Omega Race control panel - $35 + shipping

Bally Midway Omega Race 2-way mirror (for the background art) - $40 + shipping (I'm always weary of shipping glass - take your chances)

Atari Space Duel Board (partially working) - $45 + shipping
Atari Space Duel monitor bezel (the dark plexiglass cover) - $35 + shipping (I don't mind shipping plexi - should be ok.)

Taito Cadash PCB (working) - $90 SHIPPED
Taito Cadash PCB (partially working) - $40 + shipping (has a ROM error)

Atari Gauntlet 2-Player control panel overlay (new/old stock) - $40 shipped

Stern/Seeburg Rescue game board (2H ROM error) - $40 + shipping

iPAC2 board - $25 SHIPPED (already boxed and ready to go)

Omega Race wiring harness - $35 + shipping

Krazy Kong control panel overlay - $30 SHIPPED

Donkey Kong Jr. bezel - $30 + SHIPPING

Donkey Kong CPO - $35 + SHIPPING (bought this from TNT years ago.)

Qbert control panel w/overlay - $50 + SHIPPING (unpopulated - still boxed from when I bought it years ago.)

Atari AR-II Test Harness - $35 + SHIPPING (I bought this from whomever was making these on KLOV - I don't remember how much these were originally.)

Williams NVRAM mod (Spaeth kit) - $35 shipped. I have no idea how much this was originally - it's been a very long time.

Exidy Venture Control Panel - $45 + shipping - fully populated and in near perfect shape.

Grab bag of linear power supplies - $20 + shipping - There are at least 3 Midway linears included. I do not know the conditions of any of them.

Amplifone deflection boards (2) - $50 + shipping. One is populated with neckboard the other is bare (a few components on it but otherwise bare.)

Exidy Venture PCB - $40 + shipping. Untested, my Venture is gone so I have no way to test it.

Atari Sys 1 sound board - $30 + shipping. Spare board from one of my past Sys 1 cabinets. I have no way to test this board.

WG 19V2000 monitor - $100. This is a complete monitor I bought as a backup for my Omega Race (or Star Castle at the time.) The monitor is complete and looks clean - I have no way to test it.

I highly recommend picking this up - the box it came in doesn't look like it can handle another shipping. The person I bought it from made a wood frame and cover for the tube that he mounted the monitor to to protect the tube (and it worked perfectly.)
 
Tempest-to-Major Havoc conversion board - $85 + shipping (already boxed in a USPS Priority mailer ready to go)

Atari Space Duel Board (partially working) - $45 + shipping
Atari Space Duel monitor bezel (the dark plexiglass cover) - $35 + shipping (I don't mind shipping plexi - should be ok.)

Taito Cadash PCB (working) - $90 SHIPPED
Taito Cadash PCB (partially working) - $40 + shipping (has a ROM error)

Atari Gauntlet 2-Player control panel overlay (new/old stock) - $40 shipped

Stern/Seeburg Rescue game board (2H ROM error) - $40 + shipping

iPAC2 board - $25 SHIPPED (already boxed and ready to go)

Omega Race wiring harness - $35 + shipping

Krazy Kong control panel overlay - $30 SHIPPED

Donkey Kong Jr. bezel - $30 + SHIPPING

Donkey Kong CPO - $35 + SHIPPING (bought this from TNT years ago.)

Qbert control panel w/overlay - $50 + SHIPPING (unpopulated - still boxed from when I bought it years ago.)

Atari AR-II Test Harness - $35 + SHIPPING (I bought this from whomever was making these on KLOV - I don't remember how much these were originally.)

Williams NVRAM mod (Spaeth kit) - $35 shipped. I have no idea how much this was originally - it's been a very long time.

Exidy Venture Control Panel - $45 + shipping - fully populated and in near perfect shape.

Grab bag of linear power supplies - $20 + shipping - There are at least 3 Midway linears included. I do not know the conditions of any of them.

Amplifone deflection boards (2) - $50 + shipping. One is populated with neckboard the other is bare (a few components on it but otherwise bare.)

Exidy Venture PCB - $40 + shipping. Untested, my Venture is gone so I have no way to test it.

Atari Sys 1 sound board - $30 + shipping. Spare board from one of my past Sys 1 cabinets. I have no way to test this board.

WG 19V2000 monitor - $100. This is a complete monitor I bought as a backup for my Omega Race (or Star Castle at the time.) The monitor is complete and looks clean - I have no way to test it
 
Updated list: (Gray = sold)

Tempest-to-Major Havoc conversion board
- $85 + shipping (already boxed in a USPS Priority mailer ready to go)

Atari Space Duel Board (partially working) - $45 + shipping
Atari Space Duel monitor bezel (the dark plexiglass cover) - $35 + shipping (I don't mind shipping plexi - should be ok.)

Taito Cadash PCB (working) - $90 SHIPPED
Taito Cadash PCB (partially working) - $40 + shipping (has a ROM error)

Atari Gauntlet 2-Player control panel overlay (new/old stock) - $40 shipped

Stern/Seeburg Rescue game board (2H ROM error) - $40 + shipping

iPAC2 board - $25 SHIPPED (already boxed and ready to go)

Omega Race wiring harness - $35 + shipping

Krazy Kong control panel overlay - $30 SHIPPED

Donkey Kong Jr. bezel - $30 + SHIPPING

Donkey Kong CPO - $35 + SHIPPING (bought this from TNT years ago.)

Qbert control panel w/overlay - $50 + SHIPPING (unpopulated - still boxed from when I bought it years ago.)

Atari AR-II Test Harness - $35 + SHIPPING (I bought this from whomever was making these on KLOV - I don't remember how much these were originally.)

Williams NVRAM mod (Spaeth kit) - $35 shipped. I have no idea how much this was originally - it's been a very long time.

Exidy Venture Control Panel - $45 + shipping - fully populated and in near perfect shape.

Grab bag of linear power supplies - $20 + shipping - There are at least 3 Midway linears included. I do not know the conditions of any of them.

Amplifone deflection boards (2) - $50 + shipping. One is populated with neckboard the other is bare (a few components on it but otherwise bare.)

Exidy Venture PCB - $40 + shipping. Untested, my Venture is gone so I have no way to test it.

Atari Sys 1 sound board - $30 + shipping. Spare board from one of my past Sys 1 cabinets. I have no way to test this board.

WG 19V2000 monitor - $100. This is a complete monitor I bought as a backup for my Omega Race (or Star Castle at the time.) The monitor is complete and looks clean - I have no way to test it
 
Updated list: (Gray = sold)

Tempest-to-Major Havoc conversion board
- $85 + shipping (already boxed in a USPS Priority mailer ready to go)

Atari Space Duel Board (partially working) - $45 + shipping
Atari Space Duel monitor bezel (the dark plexiglass cover) - $35 + shipping (I don't mind shipping plexi - should be ok.)

Taito Cadash PCB (working) - $90 SHIPPED
Taito Cadash PCB (partially working) - $40 + shipping (has a ROM error)

Atari Gauntlet 2-Player control panel overlay (new/old stock) - $40 shipped

Stern/Seeburg Rescue game board (2H ROM error) - $40 + shipping

iPAC2 board - $25 SHIPPED (already boxed and ready to go)

Omega Race wiring harness - $35 + shipping

Krazy Kong control panel overlay - $30 SHIPPED

Donkey Kong Jr. bezel - $30 + SHIPPING

Donkey Kong CPO - $35 + SHIPPING (bought this from TNT years ago.)

Qbert control panel w/overlay - $50 + SHIPPING (unpopulated - still boxed from when I bought it years ago.)

Atari AR-II Test Harness - $35 + SHIPPING (I bought this from whomever was making these on KLOV - I don't remember how much these were originally.)

Williams NVRAM mod (Spaeth kit) - $35 shipped. I have no idea how much this was originally - it's been a very long time.

Exidy Venture Control Panel - $45 + shipping - fully populated and in near perfect shape.

Grab bag of linear power supplies - $20 + shipping - There are at least 3 Midway linears included. I do not know the conditions of any of them.

Amplifone deflection boards (2) - $50 + shipping. One is populated with neckboard the other is bare (a few components on it but otherwise bare.)

Exidy Venture PCB - $40 + shipping. Untested, my Venture is gone so I have no way to test it.

Atari Sys 1 sound board - $30 + shipping. Spare board from one of my past Sys 1 cabinets. I have no way to test this board.

WG 19V2000 monitor - $100. This is a complete monitor I bought as a backup for my Omega Race (or Star Castle at the time.) The monitor is complete and looks clean - I have no way to test it
 
Updated list: (Gray = sold) - Don't be shy to make an offer on something.

Tempest-to-Major Havoc conversion board
- $85 + shipping (already boxed in a USPS Priority mailer ready to go)

Atari Space Duel Board (partially working) - $45 + shipping
Atari Space Duel monitor bezel (the dark plexiglass cover) - $35 + shipping (I don't mind shipping plexi - should be ok.)

Taito Cadash PCB (working) - $90 SHIPPED
Taito Cadash PCB (partially working) - $40 + shipping (has a ROM error)

Atari Gauntlet 2-Player control panel overlay (new/old stock) - $40 shipped

Stern/Seeburg Rescue game board (2H ROM error) - $40 + shipping

iPAC2 board - $25 SHIPPED (already boxed and ready to go)

Omega Race wiring harness - $35 + shipping

Krazy Kong control panel overlay - $30 SHIPPED

Donkey Kong Jr. bezel - $30 + SHIPPING

Donkey Kong CPO - $35 + SHIPPING (bought this from TNT years ago.)

Qbert control panel w/overlay - $50 + SHIPPING (unpopulated - still boxed from when I bought it years ago.)

Atari AR-II Test Harness - $35 + SHIPPING (I bought this from whomever was making these on KLOV - I don't remember how much these were originally.)

Williams NVRAM mod (Spaeth kit) - $35 shipped. I have no idea how much this was originally - it's been a very long time.

Exidy Venture Control Panel - $45 + shipping - fully populated and in near perfect shape.

Grab bag of linear power supplies - $20 + shipping - There are at least 3 Midway linears included. I do not know the conditions of any of them.

Amplifone deflection boards (2) - $50 + shipping. One is populated with neckboard the other is bare (a few components on it but otherwise bare.)

Exidy Venture PCB - $40 + shipping. Untested, my Venture is gone so I have no way to test it.

Atari Sys 1 sound board - $30 + shipping. Spare board from one of my past Sys 1 cabinets. I have no way to test this board.

WG 19V2000 monitor - $100. This is a complete monitor I bought as a backup for my Omega Race (or Star Castle at the time.) The monitor is complete and looks clean - I have no way to test it
 
Updated list: (Gray = sold)

Tempest-to-Major Havoc conversion board
- $85 + shipping (already boxed in a USPS Priority mailer ready to go)

Atari Space Duel Board (partially working) - $45 + shipping
Atari Space Duel monitor bezel (the dark plexiglass cover) - $35 + shipping (I don't mind shipping plexi - should be ok.)

Taito Cadash PCB (working) - $90 SHIPPED
Taito Cadash PCB (partially working) - $40 + shipping (has a ROM error)

Atari Gauntlet 2-Player control panel overlay (new/old stock) - $40 shipped

Stern/Seeburg Rescue game board (2H ROM error) - $40 + shipping

iPAC2 board - $25 SHIPPED (already boxed and ready to go)

Omega Race wiring harness - $35 + shipping

Krazy Kong control panel overlay - $30 SHIPPED

Donkey Kong Jr. bezel - $30 + SHIPPING

Donkey Kong CPO
- $35 + SHIPPING (bought this from TNT years ago.)

Qbert control panel w/overlay - $50 + SHIPPING (still boxed from when I bought it years ago.)

Atari AR-II Test Harness - $35 + SHIPPING (I bought this from whomever was making these on KLOV - I don't remember how much these were originally.)

Williams NVRAM mod (Spaeth kit) - $35 shipped. I have no idea how much this was originally - it's been a very long time.

Exidy Venture Control Panel - $40 + shipping - fully populated and in near perfect shape.

Grab bag of linear power supplies - $20 + shipping - There are at least 3 Midway linears included. I do not know the conditions of any of them.

Amplifone deflection boards (2) - $50 + shipping. One is populated with neckboard the other is bare (a few components on it but otherwise bare.)

Exidy Venture PCB - $40 + shipping. Untested, my Venture is gone so I have no way to test it.

Atari Sys 1 sound board - $30 + shipping. Spare board from one of my past Sys 1 cabinets. I have no way to test this board.

WG 19V2000 monitor - $100. This is a complete monitor I bought as a backup for my Omega Race (or Star Castle at the time.) The monitor is complete and looks clean - I have no way to test it
 
Last edited:
Tempest-to-Major Havoc conversion board - $85 + shipping (already boxed in a USPS Priority mailer ready to go)

Atari Space Duel Board (partially working) - $45 + shipping
Atari Space Duel monitor bezel (the dark plexiglass cover) - $35 + shipping (I don't mind shipping plexi - should be ok.)

Taito Cadash PCB (working) - $90 SHIPPED
Taito Cadash PCB (partially working) - $40 + shipping (has a ROM error)

Atari Gauntlet 2-Player control panel overlay (new/old stock) - $40 shipped

Stern/Seeburg Rescue game board (2H ROM error) - $30 + shipping

iPAC2 board - $25 SHIPPED (already boxed and ready to go)

Omega Race wiring harness - $35 + shipping

Krazy Kong control panel overlay - $30 SHIPPED

Donkey Kong Jr. bezel - $30 + SHIPPING

Donkey Kong CPO
- $35 + SHIPPING (bought this from TNT years ago.)

Qbert control panel w/overlay - $50 + SHIPPING (still boxed from when I bought it years ago.)

Atari AR-II Test Harness - $35 + SHIPPING (I bought this from whomever was making these on KLOV - I don't remember how much these were originally.)

Williams NVRAM mod (Spaeth kit) - $35 shipped. I have no idea how much this was originally - it's been a very long time.

Exidy Venture Control Panel - $40 + shipping - fully populated and in near perfect shape.

Grab bag of linear power supplies - $20 + shipping - There are at least 3 Midway linears included. I do not know the conditions of any of them.

Amplifone deflection boards (2) - $50 + shipping. One is populated with neckboard the other is bare (a few components on it but otherwise bare.)

Exidy Venture PCB - $40 + shipping. Untested, my Venture is gone so I have no way to test it.

Atari Sys 1 sound board - $30 + shipping. Spare board from one of my past Sys 1 cabinets. I have no way to test this board.

WG 19V2000 monitor - $100. This is a complete monitor I bought as a backup for my Omega Race (or Star Castle at the time.) The monitor is complete and looks clean - I have no way to test it
 
2012-06-27_15-23-48_784.jpg


2012-06-27_15-24-09_794.jpg

2012-06-27_15-24-16_480.jpg


2012-06-27_15-24-36_260.jpg
 
Did you receive my last pm AMR? Please pm me with your e-mail address or phone number so I have a way to chat with you. Thanks:D!
 
Tempest-to-Major Havoc conversion board - $85 + shipping (already boxed in a USPS Priority mailer ready to go)

Atari Space Duel Board (partially working) - $40 + shipping
Atari Space Duel monitor bezel (the dark plexiglass cover) - $30 + shipping (I don't mind shipping plexi - should be ok.)

Taito Cadash PCB (working) - $90 SHIPPED
Taito Cadash PCB (partially working) - $40 + shipping (has a ROM error)

Atari Gauntlet 2-Player control panel overlay (new/old stock) - $40 shipped

Stern/Seeburg Rescue game board (2H ROM error) - $30 + shipping

iPAC2 board - $25 SHIPPED (already boxed and ready to go)

Omega Race wiring harness - $35 + shipping

Krazy Kong control panel overlay - $30 SHIPPED

Donkey Kong Jr. bezel - $30 + SHIPPING

Donkey Kong CPO
- $35 + SHIPPING (bought this from TNT years ago.)

Qbert control panel w/overlay - $45 + SHIPPING (still boxed from when I bought it years ago.)

Atari AR-II Test Harness - $35 + SHIPPING (I bought this from whomever was making these on KLOV - I don't remember how much these were originally.)

Williams NVRAM mod (Spaeth kit) - $35 shipped. I have no idea how much this was originally - it's been a very long time.

Exidy Venture Control Panel - $40 + shipping - fully populated and in near perfect shape.

Grab bag of linear power supplies - $20 + shipping - There are at least 3 Midway linears included. I do not know the conditions of any of them.

Amplifone deflection boards (2) - $50 + shipping. One is populated with neckboard the other is bare (a few components on it but otherwise bare.)

Exidy Venture PCB - $40 + shipping. Untested, my Venture is gone so I have no way to test it.

Atari Sys 1 sound board - $30 + shipping. Spare board from one of my past Sys 1 cabinets. I have no way to test this board.

WG 19V2000 monitor - $100. This is a complete monitor I bought as a backup for my Omega Race (or Star Castle at the time.) The monitor is complete and looks clean - I have no way to test it. The monitor is mounted to a wooden frame and boxed.
 
Back
Top Bottom