Parts I need to finish off some projects.. Please help!
Just picked up a super clean Centipede that's lived in a home for most of its life. But this isn't a typical centipede, it's got purple outlines on the side art (instead of yellow), purple marquee, purple plastic bezel, and the cpo is a lighter shade of blue with purple trim..
Anyone know of a nos or repro cpo that would match? As the normal centipede cpo that arcade shop sells wont match.. This is a original Atari centipede with no repro or aftermarket (Willis) parts..
Second one is Gyruss.. What I need for parts:
Cpo (silkscreen repro is fine)
Centuri raised logo coin door
Nos or really nice round base Monroe Stick
Third project is a super clean missile command upright.. Here is what I need:
New ball
Cpo or hell, I'd love a metal silkscreened panel
5 nos or repro tall alluminum cones
New bearings
Plastic monitor bezel with white type (player 1 high score today etc)
Multi kit and or working pcb
Fourth and final project is a Space Invaders.. I need:
Working pcb
Nos or repro control panel
That's it, please let me know if you have any of these parts. Don't have a lot of cash and that's the reason I posted here. Looking to trade for what I need. I've got a 3 car garage stocked with tons of parts.. Nos joysticks, bezels, marquees, pcbs, hardware, rebuilt chassis (19 and 25"), tons of tubes and frames, some new burn free tubes.
Here are a few games I'd trade for parts..
Nintendo red tent: Complete, has one working monitor and another that blows a fuse. Plus I have 2 extra rebuilt 18" sharp chassis. The monitor that blows a fuse is an 18" Sanyo.. Also have an extra pcb and some games.
Taito Stratovox: complete working game with rebuilt monitor and extra working pcb. Missing lower coin door
Taito Frontline: complete working game with almost new wells monitor (less than a few hours on it). New ps, new cpo, nos joystick, nos buttons, nos bezel, and maybe I'll toss in a raised logo taito coin door.
Taito Change Lanes: complete game but a project. Comes with 3-4 pcb sets, extra control panel, and more. One pcb worked a while back. I've only seen one other dedicated CL in 15+ years.
Midway Space Invaders: Complete game, dead.
Jamma pcbs:
Taito jamma adapter
Sly spy
Combatribes
Rough ranger
Namco System 246 (whole unit with adapter and hardrive
Namco system super22 (couple pcbs, adapter, and roms?)
Final Fight
(2) Tetris boots
Capcom bowling
Non jamma:
Tank III
(2) scramble
Stratovox
Jungle hunt
Birdie King
Cheyenne
Popeye bootleg
Sea wolf
Williams joust sound, rom, wigit (have a bunch)
Williams robotron wigit
Lots of Qix pcbs
Power Supplies:
Bunch of MCR
Lots of midway SI type
Qbert
Defender pinball sound pcb, can be used in a defender
Williams ATX adapters
Taito ATX adapters
Thanks for any help!!
Just picked up a super clean Centipede that's lived in a home for most of its life. But this isn't a typical centipede, it's got purple outlines on the side art (instead of yellow), purple marquee, purple plastic bezel, and the cpo is a lighter shade of blue with purple trim..
Anyone know of a nos or repro cpo that would match? As the normal centipede cpo that arcade shop sells wont match.. This is a original Atari centipede with no repro or aftermarket (Willis) parts..
Second one is Gyruss.. What I need for parts:
Cpo (silkscreen repro is fine)
Centuri raised logo coin door
Nos or really nice round base Monroe Stick
Third project is a super clean missile command upright.. Here is what I need:
New ball
Cpo or hell, I'd love a metal silkscreened panel
5 nos or repro tall alluminum cones
New bearings
Plastic monitor bezel with white type (player 1 high score today etc)
Multi kit and or working pcb
Fourth and final project is a Space Invaders.. I need:
Working pcb
Nos or repro control panel
That's it, please let me know if you have any of these parts. Don't have a lot of cash and that's the reason I posted here. Looking to trade for what I need. I've got a 3 car garage stocked with tons of parts.. Nos joysticks, bezels, marquees, pcbs, hardware, rebuilt chassis (19 and 25"), tons of tubes and frames, some new burn free tubes.
Here are a few games I'd trade for parts..
Nintendo red tent: Complete, has one working monitor and another that blows a fuse. Plus I have 2 extra rebuilt 18" sharp chassis. The monitor that blows a fuse is an 18" Sanyo.. Also have an extra pcb and some games.
Taito Stratovox: complete working game with rebuilt monitor and extra working pcb. Missing lower coin door
Taito Frontline: complete working game with almost new wells monitor (less than a few hours on it). New ps, new cpo, nos joystick, nos buttons, nos bezel, and maybe I'll toss in a raised logo taito coin door.
Taito Change Lanes: complete game but a project. Comes with 3-4 pcb sets, extra control panel, and more. One pcb worked a while back. I've only seen one other dedicated CL in 15+ years.
Midway Space Invaders: Complete game, dead.
Jamma pcbs:
Taito jamma adapter
Sly spy
Combatribes
Rough ranger
Namco System 246 (whole unit with adapter and hardrive
Namco system super22 (couple pcbs, adapter, and roms?)
Final Fight
(2) Tetris boots
Capcom bowling
Non jamma:
Tank III
(2) scramble
Stratovox
Jungle hunt
Birdie King
Cheyenne
Popeye bootleg
Sea wolf
Williams joust sound, rom, wigit (have a bunch)
Williams robotron wigit
Lots of Qix pcbs
Power Supplies:
Bunch of MCR
Lots of midway SI type
Qbert
Defender pinball sound pcb, can be used in a defender
Williams ATX adapters
Taito ATX adapters
Thanks for any help!!
Last edited:

