parting out nintendo vs upright.

shatter1

Active member
Joined
May 24, 2006
Messages
2,836
Reaction score
14
Location
Lubbock, Texas
Rating - 100%
31   0   0
Game is fully working and had hogans alley installed, the cabinet itself has seen better days and is beyond hope. I'm keeping the pcb and monitor but the rest is up for grabs. I'll have pics this afternoon. LMK what you need and we'll go from there.

I also still have some parts from a vs Dual Monitor upright I parted out a while back. Feel free to pm me for more info.
 
price lists..

I'm waiting for the pictures to upload for the single monitor parts and will post them as soon as they are up. All prices include shipping in the U.S. discounts given for multiple purchases just e-mail me for more info. If my prices are too high drop me a pm and we'll go from there.

Nintendo single monitor vs upright
Serial number plate - $3 shipped
Upper coin door - $20 shipped
Lower coin door – $15 shipped
Metal Coin bucket – $20 shipped
Hogans alley marquee – very yellowed $10 shipped
Horizontal monitor brackets - $12 shipped
Upper marquee bracket - $15 shipped
Lower marquee bracket/grill – has some rust $13 shipped
Manual - $5 shipped
ISO block with power plug - $25 shipped
Speaker - $12 shipped
Nintendo Gun power adapter - $15 shipped
Control Panel with working gun – cable to the gun is busted but the gun worked fine before I parted this out, there are some loose wires on the bottom blue button is gone- $30 shipped
Control panel latches (2) and lock plate for the inside bottom of control panel $8 shipped
All wire harnesses – ground harness, harness with service switch/coin counter, power for marquee light, both that come off of the pcb cage $30 shipped



Nintendo dual monitor upright parts
LOT of 6 pieces shown in the picture are included. It's the upper marquee bracket, lower marquee bracket (also speaker grill, the center plastic piece and the plastic piece that goes between the 2 control panels on the corner. $25 shipped
http://www.pbase.com/shatterproof/image/122048471.jpg

Right Control Panel – has an extra hole drilled for 3rd button, has a good set of Nintendo joysticks and a good set of red and black Nintendo buttons $35 shipped
http://www.pbase.com/shatterproof/image/124327862.jpg
http://www.pbase.com/shatterproof/image/122049382.jpg

Left Control Panel – wired for Mortal Kombat has 2 nintendo joysticks but wires are soldered on. All of the buttons are leaf buttons. $35 shipped
http://www.pbase.com/shatterproof/image/122049380.jpg
http://www.pbase.com/shatterproof/image/122049384.jpg
 
BUMP here's what's left.

Nintendo single monitor vs upright

http://www.pbase.com/shatterproof/vs_upright

Metal Coin bucket – $20 shipped
Hogans alley marquee – very yellowed $10 shipped
Horizontal monitor brackets - $12 shipped
Upper marquee bracket - $15 shipped
Lower marquee bracket/grill – has some rust $13 shipped
Manual - $5 shipped
ISO block with power plug - $25 shipped
Speaker - $12 shipped
Control panel latches (2) and lock plate for the inside bottom of control panel $8 shipped
All wire harnesses – ground harness, harness with service switch/coin counter, power for marquee light, both that come off of the pcb cage $30 shipped



Nintendo dual monitor upright parts
LOT of 6 pieces shown in the picture are included. It's the upper marquee bracket, lower marquee bracket (also speaker grill, the center plastic piece and the plastic piece that goes between the 2 control panels on the corner. $25 shipped
http://www.pbase.com/shatterproof/image/122048471.jpg

Right Control Panel – has an extra hole drilled for 3rd button, has a good set of Nintendo joysticks and a good set of red and black Nintendo buttons $35 shipped
http://www.pbase.com/shatterproof/image/124327862.jpg
http://www.pbase.com/shatterproof/image/122049382.jpg
 
Last edited:
Back
Top Bottom