Parting out: Namco World Kicks (uses NAOMI hardware)

GuidoTorpedo

Well-known member
Joined
Apr 21, 2008
Messages
4,228
Reaction score
76
Location
Maryland
Rating - 99.1%
105   1   0
Parting out: Namco World Kicks (uses NAOMI hardware)

I've decided to part this beast out. This is the giant 4 player soccer game made by Namco that runs Naomi 1 hardware. Here is what I have:

Naomi mobo with what appears to be a bad cart for world Kicks. Cart was tested in another mobo and would not boot. I believe the mobo to be good, but don't have another cart to test in it. With this cart, mobo gets to the Naomi power up screen and shows an error 1 (again, this shows with this cart in another mobo as well). $50 shipped as is with the bad cart.

Namco Naomi interface I/O board. This is not JAMMA, and looks different than the dedicated Sega I/O, so assume it will not trandscend titles. $30 shipped

Power supply Imperial model 44-1090. Used, working. $20 shipped.

Set of 4 joystick panels. These are the sticks and buttons used for this game. Each panel has 2 buttons and 1 hall effect type stick. Untested (never got the game to boot). $50 shipped for all 4.

Set of 4 kick balls. $50 shipped, untested.

Take the whole shooting match for $130 shipped. Probably a good opportunity to get spares if you have one of these beasts.

Thanks!
-Mike
 
Pics on request of the I/O and joystick panels:
 

Attachments

  • oct2010 013.jpg
    oct2010 013.jpg
    43.6 KB · Views: 14
  • oct2010 012.jpg
    oct2010 012.jpg
    26.7 KB · Views: 8
  • oct2010 011.jpg
    oct2010 011.jpg
    27.7 KB · Views: 6
  • oct2010 010.jpg
    oct2010 010.jpg
    25.6 KB · Views: 5
  • oct2010 009.jpg
    oct2010 009.jpg
    33 KB · Views: 6
Back
Top Bottom