parting out my gorf

nuckinfuts68

Member
Joined
Jul 5, 2008
Messages
912
Reaction score
4
Location
ashville, New York
Rating - 100%
15   0   0
i have 2 pcb sets. 1st set works but has lines...( as pic shows ) and your ship blows up as soon as ya start. will cycle thru attract mode with no probs... ( except for the lines of course )... was told it may be a ram issue. $30 + shipping....( SALE PENDING )

2nd set worked as the 1st with the line issue but now just a little crap comes up then nothing. the H eprom on the rom/ram board has 2 broken legs. $20 + shipping.... (SALE PENDING )

working populated control panel. stick is pretty trashed but the panel itself is nice. couple small dents on the front edge. pic doesn't do it justice for sure. $65 + shipping.... ( SALE PENDING )

working power board A080-90411-B000.....was putting out a bit high on the +5 at 5.21 and has a couple normal burn marks which were fixed...( not by me ) $20 shipped... ( SALE PENDING )

rgb inverter and the volume board panel thing. $12 shipped for the pair..... ( SALE PENDING )

have all the cosmetics which are very nice expect for the marquee... ( it's trash ) no set price for this stuff. just let me know what ya need and we can work out a nice cheap price.... ( POSSIBLE SALE PENDING )

pcb #1
000_0185.jpg


control panel
000_0186.jpg
 
Last edited:
Damn - that control panel looks like it's in really good shape.

Is the lower monitor bezel above the CP plain, or does it have louvers? If it has louvers, I'll take it.
 
Back
Top Bottom