FS Parts: Parting out a Sega Super GT (Tilt version)

Teknotoyz

Well-known member
Joined
Aug 15, 2009
Messages
2,428
Reaction score
34
Location
BUFFALO, West Virginia
Rating - 100%
53   0   0
OK, I need to gather interest in what parts people may have interest in.
I will be parting out a single side of a Super GT.
I will likely keep the Boards as spares for the other 3 seats that I have.


Many items may fit Daytona and Daytona 2.
Available items:
-- Most hardware is available.
-- Seat and adjuster
..... -Seat back
..... -Speakers
..... -Plastic bottom
..... -Plastic back
..... -Metal supports
..... -Adjuster mechanism
..... -base (likely too heavy to ship)
-- Dash parts
-- Tinted Bezel glass
-- Bezel retainers
-- Dash speaker grills
-- Front Speakers
-- Main speaker grills
-- wire harness (complete!! but this is the slave unit, will need a power cord and switch)
-- Transformers (2 - Isolation, and main big one)
-- marquee (really big, not sure how I would ship)
-- topper lights
-- pedals
-- bottom platform (pickup only I think, large and heavy, this is FREE)
-- Caster wheels and cabinet feet
Just ask even if you don't see it in the list.

Please post a list of items your interested in, it may be a couple of weeks, but I will get back to you with what I have that matches your list and an asking price for the lot. I am located in zip 25033 if you want to figure shipping. Pickup is fine.

DSC05682.jpg

336c4d71.jpg



The story behind the machine:
WHY part it?? Well, I bought a Super GT twin from Tilt and got home to realize that one monitor tube was bad. Dammit, monitors are more expensive than what Tilt was selling twins for. So I decided to go back and buy another set. After getting it, both tubes on the 2nd set were good..... after some thought, I decided to make room for a third seat, couldn't fit 4 anyway. Well, if I have three I'm keeping, keeping spare parts is a good idea too. The forth will donate any missing parts, nicer parts, and spares for the other 3. No monitor and no coin box or even power cord means it's not whole machine anymore either.
 
Last edited:
I need:

One of these plastic covers with hardware:

IMAG1183.jpg




I need a fiber optic coupler (no pic needed, lol)

I need two of the threaded head bolts that are from the shifter:

IMAG1152.jpg


One of these left hand brackets:
IMAG1125.jpg


The rubber mat, assuming they come off the wood easily (I could also use the hardware that holds the trim pieces) if you are willing to separate this piece (shipping the whole thing would be $$$):
IMAG1126.jpg


Two of the missing security torx bolts seen here:
IMAG1127.jpg




That "race leader" relay board if for some reason you have an extra (long shot, I know)

And I could use 4x of the feet.
 
Wood cabinet (monitor housing) is now gone.
There is a short time period for the metal base and other larger parts as I have to clear my garage. I will set them out by the road for the scrappers very soon.
 
I need:
-One of these plastic dash price covers with hardware:
-I need a fiber optic coupler (no pic needed, lol)
-two of the threaded head bolts that are from the shifter:
-Left hand dash bracket
-Rubber mat & hardware that holds the trim pieces
-Two of the missing dash security torx bolts
-That "race leader" relay board if for some reason you have an extra (long shot, I know)
-4x of the feet.

I think I have most items except a good relay board as the manager decided to "help" me by installing all 60watt bulbs....Fried the spare one. I do have the defunct one, doubt that helps you. Not sure about the dash screws as i was short by a few as well.
I should be able to take the mat off.
 
Last edited:
I think I have most items except a good relay board as the manager decided to "help" me by installing all 60watt bulbs....Fried the spare one. I do have the defunct one, doubt that helps you. Not sure about the dash screws as i was short by a few as well.
I should be able to take the mat off.

If you only have a few of the feet, I'll take whatever you have left. I know I'm missing 2, and have another that is messed up. This thing is impossible to move on carpet, even with the feet down on sliders taking 1/2 of the weight from the wheels.
 
WOW, broke the cabinet down tonight.
Space demands are just too much to wait.
I was very surprised by how little was really left.
I'm tossing the metal base, dash, & Bezel supports, just no way to ship them.
They will last maybe an hour by the road till a scrapper grabs them.

I'll pull a list together with prices soon.
 
I have one of the really long marquees for this game as well, if anyone's interested.

Is yours a Tilt version (used in the stainless topper) or the normal red version one?
How come your selling it?
I'm going to attempt to cut the twin topper in half to fit the single, marquee won't work for me.
 
Is yours a Tilt version (used in the stainless topper) or the normal red version one?
How come your selling it?
I'm going to attempt to cut the twin topper in half to fit the single, marquee won't work for me.

It's the big twin one, I believe. It's not on my wall any more. I've redecorated and it's just sitting around, hence I have no need for it any more.

picture.php
 
That is the twin yellow one from Tilt.

On closer Google-based inspection, it might be the same on both machines.
 
Last edited:
I guess for the moment this is more or less closed.
I will ship everything paid for tomorrow,
and will list a few individual items left over in a for sale thread later.

There are a couple of guys who have interest in some items, will keep in touch via PM.
 
Back
Top Bottom