Partial Puck Man Restore

Pixel8Arcade

Temporarily Banned - Using fraudulent links to gai
Joined
Feb 10, 2014
Messages
1,201
Reaction score
32
Location
Kanata, Ontario, Canada
I didn't go 100% with this restore as the machine was going on location. However I did want it cleaned up as a fresh machine will get more use.

Here's a break down of what was done...

-complete vacuum and interior clean
-added a new 25' power cord
-added a rear handle for transporting
-painted marquee brackets black
-4 corner protectors
-2 lower side (aluminum L bracket) protectors
-new locks
-new CDN coin mechs
-coin door painted
-complete exterior paint job (white and black)
-new 4 way joystick
-new P1 P2 buttons
-new cp bolts
-new cpo
-new bezel plexi with overlay sticker
-new marquee sticker over the old one
-new sideart
-new t-molding

I have decals from Etienne, but didn't put them on yet. I'd want to do a better job on the rear of the cab before installing.

If I went to sell this I would get a better cpo, perfect side art, a traditional Midway style coin door and give it a few more coats of paint.

But for now it has new life and it is getting serious play.
 

Attachments

  • image.jpg
    image.jpg
    190.2 KB · Views: 83
Last edited:
What exactly is a puck man???

Pac-Man was born Puck-Man, but name changed by Bally/Midway in the US. There was worry that people would vandalize the P to an F and, you know. Namco kept the changed name.
 
Back
Top Bottom