Museum of the Game® & International Arcade Museum® Forums

I have a paperboy cabinet but I also have parts to build about 4 paperboys so its time to start a reproduction cabinet and match it to the original cabinet. I've already fixed some pretty important pieces on the plans and also verified some critical pieces as well! Anyone else use the paperboy plans that can tell me what issues they ran into? Im working on all the cleat positioning but just a few issues I found with the plans so far:

1. No cleat Position (added cleat positions to all the major pieces of the cabinet)
2. Base was off by .25" (from front to back)
3. Front Panel was .125" short
4. Back Panels were off by .0625" on Width
5. Front sides for where coindoor goes had the wrong angle (off by 1.7 degrees)
6. Coin Door Panel needed slight adjustments.

Pictures to follow!