Museum of the Game® & International Arcade Museum® Forums

trying to repair a no name cocktail for a guy. he bought it new during covid, it worked a month and he just let it sit. it has controls at each end for vertical games, and a panel on one long side for horizontal games. no signal to monitor. monitor good. power supply good. pandora box lights up inside, but led is red. maybe it should be green.see pic. there is one LED on the jamma adapter. lights up red, then goes out. the was a sticker inside im guessing is the control box number. i took apart the box, a similiar sticker on the box pc board, but slightly different number. the box has a 16mb SD card, which i assume is the software. i reseated the card, no help. game also has an i/o board, see pics. not sure where to procede from here. it also has a small pigtail connector coming out of it, going to the i/o board that i dont recognize from other units ive seen. should i buy a pre loaded pandora box and hope it will play games and all the controls work or can i buy that box and use the sd card from the old one. thanks
Back
Top Bottom