Pacman Arcade maze and Sprite issue

superryan14

New member
Joined
Jul 22, 2024
Messages
4
Reaction score
0
Hello! I'm currently restoring a pacman can and recently got the PCB able to boot the game.

I got new roms and all new ram at 4K 4L 4M 4N 4P and 4R and that got the have to boot and play. But my current issue is, the maze is a bunch of numbers and the ghost sprites are also numbers 1-6

Not sure if I didn't look hard enough but I couldn't find anything that was specifically like this. Any help in the right direction would be great!
 

Attachments

  • IMG_20250123_204828.jpg
    IMG_20250123_204828.jpg
    292.8 KB · Views: 26

Attachments

  • IMG_20250129_165345.jpg
    IMG_20250129_165345.jpg
    239.1 KB · Views: 7
Actually it's CA11, CA10 (not lablled, but 4D:2.

Good chance it's shorted to another trace.
Yep this was it! One of the pins on 5E had a very small cold solder joint, reflowed the solder and it works like normal again! Only thing now is it shakes left and right a bit and it's not centered but I think thats a monitor issue I'll mess with later. Thank you again for the help!
 

Attachments

  • IMG_20250129_201612.jpg
    IMG_20250129_201612.jpg
    397.3 KB · Views: 10
Back
Top Bottom