Pacman 4 in 1 hack problem

aminer1

Member
Joined
Nov 10, 2008
Messages
39
Reaction score
0
Location
Grand Rapids, Michigan
I have a working Ms Pacman that I am trying to install the 4 in 1 into. I took everything back off and tryed to get it working 3 times now. I have tryed differnet roms with no change. I took the ram off at 4n and 4k and put it on the HSS PCB, should they be replaced with 2114? Any thoughts?
 

Attachments

  • 20090101_01_01.jpg
    20090101_01_01.jpg
    96.6 KB · Views: 72
  • 20090101_02_01.jpg
    20090101_02_01.jpg
    96.8 KB · Views: 61
  • 20090101_03.jpg
    20090101_03.jpg
    96.7 KB · Views: 70
  • 20090101_03_01.jpg
    20090101_03_01.jpg
    96.4 KB · Views: 52
I can't tell from the pic but I think you have the connection to 7L connected to pin 8 and not pin 9. It's a 14 pin chip so 8 is in the top row not the bottom.

14 13 12 11 10 9 8
>
1 2 3 4 5 6 7

I have a working Ms Pacman that I am trying to install the 4 in 1 into. I took everything back off and tryed to get it working 3 times now. I have tryed differnet roms with no change. I took the ram off at 4n and 4k and put it on the HSS PCB, should they be replaced with 2114? Any thoughts?
 
Back
Top Bottom