Pac & Pal instruction card

Jr. Pac

Well-known member

Donor 2012, 2015
Joined
Jan 1, 2012
Messages
5,569
Reaction score
450
Location
KC Area, Kansas
For absolutely no specific reason, I'm vectoring the Pac & Pal card by eye from one pic on the net with my own Engrish translations and was wonderering if anyone on here had any idea what the dimensions are? I estimated it to be around 6x9.

Capture3.jpg
 
6x9 sounds too big. Most of the cocktail instruction cards I have bouncing around are way more like 3x4.5. I can measure a few if need be.
 
To my knowledge there isn't any sideart, marquees, or control panel overlays for this game...they did make a rare conversion kit for super pac cocktail I've seen..but that was just a chip set swap with existing super pac board and instruction cards....someone on this site had one I think at one point.. I do have a dedicated pac N pal board which is on a mappy style board... but the best way to play the game is the super pac board swap...because with that one no deviation of the control panel is needed..with the dedicated version played in mappy style cab / Jr. Pac cab you actually have to wire in an added button..

That conversion kit was what inspired me to figure out the chip swap for the super pac board which Riptor knows all about now:D..

Once you figure out the security code bypass chip you can easily swap in the game chips..
 
I'd agree, it doesn't seem like there has ever been a Pac & Pal UR but I would like to see one done. I'm going to try and come up with some art after the card is done.


Thanks for the feedback on size. I've only seen one of those non-Midway CTs and it didn't have a card.
 
I have thought about doing some type of dedicated version of Pac N Pal since I have the boards...but never got around to designing any kind of mock up for the art..I'm sure some of the talented minds on this site could come up with something pretty nice...
 
GO for it! I would just love to see a Pac and Pal dedicated.

Here's just a quickie basic concept mockup for a marquee. This I just did in like 5 minutes.
 

Attachments

  • 1.jpg
    1.jpg
    21.7 KB · Views: 16
This morning has not been mine... hardly slept.

How about a Pac Plus style, with characters added?
 

Attachments

  • 3.jpg
    3.jpg
    22.5 KB · Views: 27
Pac and Pal, like Tower of Druaga, Phozon, Ms. Pac Man (in Japan) and Dig Dug II, came only in kit form for the generic Namco cocktail used in the period. That's why there's no artwork for it. I love what you've done so far, Jr.! Eventually I want to make a dedicated Wonder Momo/Tower of Druaga 2 in 1 upright myself.
 
Update, still gotta do the characters. Any feedback?
 

Attachments

  • 5.jpg
    5.jpg
    23.4 KB · Views: 14
  • mockup 5 messy.jpg
    mockup 5 messy.jpg
    98.6 KB · Views: 19
Back
Top Bottom