Pac man video problem

14k 4606 Wells G

I can adjust the horizontal, horizontal moves everything but wont lock up the picture the 4606 monitor is the one with the two little circuit boards
 
Last edited:
If you just did a cap kit, you may need to adjust L351 on the vert/horz card to get it to sync up. It is very common and over looked a lot in the 4600's when doing a cap kit.
 
Dang tried that and it won't quite take it out, i wonder if i had the wires to close to the yoke? thx for staying on line with me here i apprecaite your help
 
What I do when adjusting L351, is center VR351 first. L351 is the coarse sync, and VR351 is the fine sync, so to speak.
 
oh wow i just went backwards, it's all scrambled again. Problem has to be on the board?
 
picture of the board
 

Attachments

  • pacboard.jpg
    pacboard.jpg
    46.8 KB · Views: 23
Thanks to Ken and Dokert, I went back today and worked on the monitor problem and was able to fix it this time. I know it's been over a month but i don't get as much time as i would like to work on the games :)

Thanks to everyone that helped me get it working,

Shayne...
 
I had to adjust the Horizonal adjustment as per the link http://homearcade.org/BBBB/slanted.html Ken game me and had to do some other adjustments as per John. But once i got onto the Horizonal Adjustment that pretty much did it
 

Attachments

  • horadj.jpg
    horadj.jpg
    28.7 KB · Views: 4
Back
Top Bottom