Pac-Man plus loose EPROM Kit

Waterborn

Active member
Joined
May 3, 2009
Messages
1,303
Reaction score
23
Location
North Myrtle Beach, Florida
Rating - 100%
22   0   0
Looking for the parts to convert my Ms. Pac-man main board to a Pac-Man plus. Already have the main board, just need the EPROMs/PROMs.

I am also looking for any spare pac-based piggyback boards that are available.

Thanks
 
pacman plus

yep found it--do 25.00 shipped--these worked about a year ago--swapped my board back to MS Pacman--
 

Attachments

  • 100_5063.jpg
    100_5063.jpg
    96.9 KB · Views: 27
Personally I wouldnt go with an original pac plus blob. Either a multi kit of some sort or have a set of decrypted pac plus roms burned so you dont have to run the aux board.
 
Well, the ribbon cables on the aux boards are not very reliable for one. Also, its not like a mspac where you just replace the cable, the one end is epoxied into the board. The best you can do is crimp a new end on it if you have the connectors and correct crimpers.
Those ribbon cables are problematic whether its a mspac or pac plus. The decryped roms are a simple rom and prom swap and dont use the aux board with ribbon cable. Its a more reliable setup and cheaper.
 
Back
Top Bottom