well i bought a pac pcb off a member here....it was supposed to work....it has a 4 in 1 kit on it....the sound seems to work but nothing else...it just has nothing but garbage displayed.......any advise guys.
There is a great site out there that has images of the screens in the various states of failure with tips on where to start. I have it bookmarked on my desktop but do not have access while on the road today.
well i bought a pac pcb off a member here....it was supposed to work....it has a 4 in 1 kit on it....the sound seems to work but nothing else...it just has nothing but garbage displayed.......any advise guys.
If you bought it from someone here, if you haven't already, I'd recommend talking to the member. Most KLOVers are stand up people and will help you out, especially if the board is advertised as working and arrived otherwise.
ok its working again......reseated it again for a 3rd time...thanks jarrod.....z 80 was the problem......i did not resseat it cause it was under the v ram board ...so its working....3rd time is a charm......................lol
Is there an "idot's guide" to doing the 4 in one? I ask because while I am fairly confident in my abilities, pictures would be worth a thousand words, and every instruction I can find for the 4 in 1 is all words...
Is there an "idot's guide" to doing the 4 in one? I ask because while I am fairly confident in my abilities, pictures would be worth a thousand words, and every instruction I can find for the 4 in 1 is all words...