Peale Active member VAPS Joined Sep 1, 2003 Messages 3,469 Reaction score 15 Location Brattleboro, Vermont Jun 15, 2012 #1 Placing an order @ Mouser, is this what I need? http://www.mouser.com/ProductDetail...4pz39agNJD30anlF0w%2bnDq1LhlUD9OeOR4zvdxcpK8=
Placing an order @ Mouser, is this what I need? http://www.mouser.com/ProductDetail...4pz39agNJD30anlF0w%2bnDq1LhlUD9OeOR4zvdxcpK8=
Oryk Zinyo Well-known member VAPS Joined Jul 24, 2007 Messages 8,997 Reaction score 134 Location Bremerton, Washington Jun 15, 2012 #2 That'll work, but I prefer crimp connections so that I don't have to replace the whole connector if there is a problem.
That'll work, but I prefer crimp connections so that I don't have to replace the whole connector if there is a problem.
OP OP Peale Active member VAPS Joined Sep 1, 2003 Messages 3,469 Reaction score 15 Location Brattleboro, Vermont Jun 15, 2012 #3 I was just making sure of the spacing; I'm making a Pac to JAMMA adapter. Thank you.
Riptor Well-known member VAPS Joined Jul 10, 2007 Messages 12,078 Reaction score 144 Location Leonartown, Maryland Jun 15, 2012 #4 Yes, 3.96mm = .156" which is what you need. Btw, I have them a little cheaper on my site. http://www.twistywristarcade.com/edge-connectors/132-22-44-pin-edge-connector-sec.html
Yes, 3.96mm = .156" which is what you need. Btw, I have them a little cheaper on my site. http://www.twistywristarcade.com/edge-connectors/132-22-44-pin-edge-connector-sec.html
OP OP Peale Active member VAPS Joined Sep 1, 2003 Messages 3,469 Reaction score 15 Location Brattleboro, Vermont Jun 20, 2012 #5 So you do! But, as I was already placing a Mouser order, I bundled it with.