Pac-Man CP Wood

Just repainted mine, happened to have it out...
 

Attachments

  • 103_1116.jpg
    103_1116.jpg
    99.5 KB · Views: 30
  • 103_1118.jpg
    103_1118.jpg
    97.2 KB · Views: 27
  • 103_1119.jpg
    103_1119.jpg
    94.5 KB · Views: 21
  • 103_1120.jpg
    103_1120.jpg
    99.9 KB · Views: 23
  • 103_1121.jpg
    103_1121.jpg
    100 KB · Views: 14
Mine may have been painted at some point before... it had a light coating of black.

Muffindude, do you just want overall dimensions?
Well, here is a picture of what I'm repairing.
attachment.php

I need to rebuild where the Joystick mounts onto the wood.
 

Attachments

  • P1040256.jpg
    P1040256.jpg
    20.8 KB · Views: 199
  • P1040255.jpg
    P1040255.jpg
    20.6 KB · Views: 10
I made a couple of these years ago, but am not sure I still have all of the dims. I used 3/4 inch plywood IIRC and it looked great. The end towards the bend on the front of the CP is rounded, so a good wood file will take care of that in no time. :)
All of the originals I have seen were sprayed with a light coat of dull black.


Good luck.

Scott C.
 
Well, here is a picture of what I'm repairing.
attachment.php

I need to rebuild where the Joystick mounts onto the wood.

Holy smokes. Or you could use that space and put 4 joys side by side for some really uncomfortable Smash TV. :) I will see if I can get some measurements for you tomorrow off mine, where the joystick hole comes in relation to the rest of the wood, unless someone beats me to it.
 
This pic has the dimensions, hope it helps!
 

Attachments

  • pac man CP wood joystick hole.jpg
    pac man CP wood joystick hole.jpg
    94.9 KB · Views: 15
Back
Top Bottom