Pac-Man Cocktail Control Panel Parts

Peale

Active member
Joined
Sep 1, 2003
Messages
3,469
Reaction score
15
Location
Brattleboro, Vermont
The cocktail which I am restoring was in a barn for years. Mice made a mess out of a lot of it, including chewing the control panel wiring.

I'm going to rewire the CP from scratch, with new wire, but using the original connector housing. They're AMP brand connectors.

What are the part numbers for the pins in the housing? Both male and female?

Can I use my Molex brand crimper to crimp the wires on?
 
Okay...research has led me to:

1) AMP doesn't exist any more. They're owned by TYCO now.

2) TYCO isn't listed on parts sites (Mouser) by Tyco - they're TE Connectivity. That took me a while to figure out.


I'm surprised that these things aren't detailed in the manual. Every other part on the game is listed, but not the connectors?
 
Gentle bump. I ordered pins which I thought were fine - they weren't. They were itty-bitty.

So, which pins do I need, please?
 
Control panel uses 12 position molex .084 for player one & 9 position molex .084 for player two.

Before you ask...

coin door uses 9 position molex .084
monitor used 2 position molex .084, but should be changed out to 2 position molex .093
power cord uses 3 position molex .084
fan uses 3 postion molex .084

edge connector was amp 22/44 which is no longer available and now uses molex 22/44
Dok
 
22/44 edge connectors are only available from Bob or Riptor
50-84-1090
50-84-2090
50-84-1120
50-84-2120
50-84-1030
50-84-2030
19-09-2029
19-09-1029
02-08-2004
02-08-1002
02-09-1119
02-09-2118
08-03-0303
Dok
 
No...the connector that connects the CPs to the rest of the harness. I had thought that that was an AMP brand connector.

A .093 pin will fit in a housing meant for a .084 pin? Cool.
 
Have you been drinking too much egg nog? Do you need pictures to follow along?

No, .084 pins will not work in a .093 housing or vice versa.
 
Have you been drinking too much egg nog? Do you need pictures to follow along?

No, .084 pins will not work in a .093 housing or vice versa.

Sorry, I read "should be changed out for..." and used that to blanket ALL of the pins.

And, I hadn't realized that the list of part numbers that you provided were for that, the way that you worded it I thought those were different part numbers for the edge connector.

Thank you.
 
Back
Top Bottom