pac man cocktail bases

[timiskander]

Midway (pacman, galaxian, others?) cocktail bases

Needed a few of these for myself and a buddy, so we made a few extras.

These were made to match a pac-man cocktail, but may fit others of a similar style. I have 8 extras at the moment.

These are pretty much an exact replica of the original. Mortise and Tenon corners, 3/4" hardwood plywood frame, 5/4" (1" actual thickness) poplar corner blocks. Pre-drilled for mounting. A whole lot more effort goes in to making something like this than you would think. Jigs have to be made, lots of countersunk holes, lots of sanding, etc...
More pics of the pieces and process are here..

https://picasaweb.google.com/timiskander/MidwayCocktailCabinetBases#

Looking to get $50 shipped anywhere in the lower 48 (US). Other destinations possible, inquire about shipping costs..

cheers
/Tim

 

[tron guy]

nice work on those and good price

 

[rockymtn]

Very nice! I will measure the bottom of my Galaxian cocktail cabinet and if the dimensions are the same, buy one from you.

 

[YODAinMN]

Very nice! I will measure the bottom of my Galaxian cocktail cabinet and if the dimensions are the same, buy one from you.

No need to measure-- it will be identical. I had to make one for myself as well but these absolutely look spot-on..

 

[rockymtn]

Looking forward to receiving mine! The time it would take me to build one is worth more than $50.

 

[timiskander]

Bump... still have a few left.
cheers
/Tim

 

[kpkube]

will this fit a ms pacman cocktail?

 

[timiskander]

will this fit a ms pacman cocktail?

It would probably fit on the cabinet, but I'm pretty sure ms pac cocktails didn't have a base... I could be wrong tho.

cheers
/Tim

 

[timiskander]

BUMP!
only 3 left

 

[rockymtn]

Good timing for your bump...I just got my new base installed on a Galaxian Cocktail last night and its the "Cat's Meow". Thanks for a quality base and all the new hardware that comes with it (leg leveler mounts, screws).

 

[timiskander]

All gone!!!
thanks guys!
cheers
/Tim

 

[andykmv]

you have an interesting machinery setup !

could you do some closeup pics of each machine setup ?

and the underneath of the routing table showing the router mounting ?

 

[timiskander]

you have an interesting machinery setup !

could you do some closeup pics of each machine setup ?

and the underneath of the routing table showing the router mounting ?

Sorry.. that's my buddy's workshop, not mine (I wish it was tho )
cheers
/Tim

 

[andykmv]

... not mine (I wish it was tho )...

same here!