Pac-Man cabaret plans

ieure

Well-known member

Donor 2014-2015
Joined
Feb 12, 2010
Messages
6,596
Reaction score
986
Location
Portland, Oregon
I'm prepping for a pretty intense restore/rebuild of my Pac mini this spring, and I was hoping I could find some plans to validate what I'm doing.

I found this Arcade Dimensions site, which had what I needed, but has been down for a while.

If anyone out there happened to snag these plans when it was up, I'd greatly appreciate a copy.
 
what do you need to know? there is a local friend that has a water damaged pacman mini. think it's still in their garage.
if you get an exact list of details, we can probably get what you need to know.
 
what do you need to know? there is a local friend that has a water damaged pacman mini. think it's still in their garage.
if you get an exact list of details, we can probably get what you need to know.

That's what I have. :( I was hoping there was something that had complete dimensions, routing, etc for the whole cabinet. Interior, top, marquee area, everything. Like these upright plans, but for a cabaret.
 
someone on this site is in the business of making new cnc cabinets. might do a search. i bet they have the plans but probably in a CAD program.
 
Once I get to mine, I'll see about draw up plans & posting them. I'd consider building cabs of others or cutting the pieces and shipping them flat, if there is interest.
 
Get the water damaged one to DPTWIZ so he can make new ones. It woulc be nice to have the Midway and Williams mini cabs available for repro.

Michael
Yes, it would, but don't get me started on this topic again!

Scott C.
 
i can get ahold of that cabinet without much trouble but no way am i footing the bill for shipping the monstrosity. or figuring out how to ship something that big. you guys would have to work out the details and just pick it up from here via shipping method.
 
If you have a cabinet, you have what you need to make a copy. Have someone give you an exact height measurement, then trace yours on a 4X8 sheet of ply to make a template. If the bottom of yours is rough, you'll know how high to slide the old side up on the plywood to the correct height.
 
If you have a cabinet, you have what you need to make a copy. Have someone give you an exact height measurement, then trace yours on a 4X8 sheet of ply to make a template. If the bottom of yours is rough, you'll know how high to slide the old side up on the plywood to the correct height.

Yeah, I know; I just would really like it if I had plans so I could confirm that what I see on mine is correct. I'm not missing huge chunks or anything, so I'm confident I can reproduce it from what I have. It would just be nice if the information was available and I could cross-check against it.
 
Back
Top Bottom