Pac-Man (and the like) edge connector

What do you want, just the black housing without the pins? Or do you want one like this?

12-pin_Edge_Conn_Sample_copy.gif


Either way, I have some of each...
 
That stinks. What's the difference between what I linked and what I need?

Modesitt: solder eyelet is fine. I've got a Pac harness I may need to replace, plus I have some adapters I'm thinking about making.
 
that one's a .2" center to center spacing. Standard for most arcade games that i've seen is .156 center to center.
 
I ordered all the edge connector sizes I use on my adapters from www.jammaboards.com

If you don't need many, or don't want to order from them, let me know and we can works something out from my stock, which I'll replenish with them later...
 
I've got no problems with JammaBoards.Com, I've just been preparing an order with Mouser and was looking to conserve shipping as much as possible. I'm already getting the fuse blocks from Mouser, so I was going to add a couple on top.
 
same one i found. Not cheap though. I was looking at Jameco right now.
 


I've been stocking up on Molex plugs such as the 09-50-5xx5 series.
Unfortunately, Molex issued a last time buy last month... and gave a measly two week notice. I bought out every 09-50-5245 they had in stock but had to split the order with Mouser. Seems that nearly every other size is already -gone for good-.

Ed
 
I've been stocking up on Molex plugs such as the 09-50-5xx5 series.
Unfortunately, Molex issued a last time buy last month... and gave a measly two week notice. I bought out every 09-50-5245 they had in stock but had to split the order with Mouser. Seems that nearly every other size is already -gone for good-.

Ed

Man, that's totally gonna suck in the near future.

Edward
 
According to my sources these will still be available. The lead time will be 3 to 4 weeks, and the minimum buy will be crazy high. Anywhere from 3000 to 20K pieces.
 
According to my sources these will still be available. The lead time will be 3 to 4 weeks, and the minimum buy will be crazy high. Anywhere from 3000 to 20K pieces.

I'm sorry Dave, but at 20K....might as well be unavailable :)

All the poor Pac's that are gonna get "hard wired".

Edward
 
I've been stocking up on Molex plugs such as the 09-50-5xx5 series.
Unfortunately, Molex issued a last time buy last month... and gave a measly two week notice. I bought out every 09-50-5245 they had in stock but had to split the order with Mouser. Seems that nearly every other size is already -gone for good-.

Ed

Which ones are those?
 
Back
Top Bottom