P.O.W. resets

lopan2008

New member
Joined
Sep 21, 2008
Messages
166
Reaction score
0
Location
Strasburg, Virginia
My P.O.W. board has started resetting when powered on and entering demo mode or when coined up and a few seconds into gameplay. I have triple checked all the connections and the JAMMA harness with another board. Any suggestions as to where to look next?
 
My P.O.W. board has started resetting when powered on and entering demo mode or when coined up and a few seconds into gameplay. I have triple checked all the connections and the JAMMA harness with another board. Any suggestions as to where to look next?

id check the 5 volts... if its too low or too high there y go...

i prefer to set mine at 5.2 volts AT the edge connector..
 
Back
Top Bottom