outrunners question

SHADOWMOSES

Active member

Donor 2023
Joined
Jul 13, 2009
Messages
514
Reaction score
239
Location
Lake Stevens, Washington
hi, anyone have an outrunners machine, i have some monitor questions, ive recently gotten one with both monitor tubes broken, it also had some wiring issues i got the manual and pretty much fixed all the wiring issues, now the guy i got it from said they were 25inch monitors but the book says they are 26 inch monitors manufactured by sanwa or nanao, but ive pulled both monitors and they are wells gardener monitors model # 25K7193, i found a matching pair of standard res. monitors that are 25 inches so my question is does this machine use 25 or 26 inch monitors and if it uses 26 can i put 25 inch ones in it or will i have power issues, thanx for any help this is my first arcade project, Ben
 
I cant tell you whats original for that game, but the 25K's you pulled from it are 25". If they looked right mounted in there, and you found the same thing, go for it.
 
Sega typically measured their tubes via Japanese standards, which equates to adding an inch or so.

As for the WG/Nanao question, the WGs were probably factory. Sega used several methods of downgrading export cabs. Many of Sega's US cabs were fitted with WGs instead of the much nicer (and presumably more expensive) Nanaos and Sanwas.
 
Back
Top Bottom