OutRun monitor issues WG 19K4901

S4Patrick

Active member
Joined
May 21, 2010
Messages
571
Reaction score
110
Location
Michigan
So my Out Run monitor has some issues....

Hope you guys can perhaps shed some light as to what's going on here....

The top 15% of the monitor is not displaying a picture, regardless of any setting adjustments I make. This is the same for the right-hand side, but only the last 10% of the screen isn't displaying a picture, regardless of any adjustments I make.

Also, there's the red-green-blue "banding" going on along the top of the screen--convergence out of alignment creating the color banding?

Any input is greatly appreciated.....

Thanks...

Outrun-screen-1.jpg


Outrun-screen-2.jpg


Outrun-screen-3.jpg

~Patrick
 
Last edited:
have you done a cap kit yet.

most of your issues can be caused by bad caps.

it also appears you have some convergence issues as well.

Peace
Buffett
 
Thanks...that's probably the best place to start.

Anyone know if Chad @ arcade Cup is still working on monitor PCBs? I e-mailed him over a week ago with no reply as of yet...

Any other places/ people that can provide recapping services for G 19K4901 monitors?
 
Back
Top Bottom