Outrun front cabinet decal

VIPER13

New member
Joined
Oct 19, 2009
Messages
70
Reaction score
0
Location
Michigan
Does anyone have for sale, or know if they make a repro decal of the red stripe that runs down the front of the Outrun cabinet? Mine actually has another oval sticker over the top of the stripe. I can't tell if the oval one is original or not, but I was going to repaint the front of the cabinet and just go with the one red stripe. I will post some pics later.
 
The oval decal is different from the Turbo one. I have only seen it on one other cabinet before, but it was located in a different place on the front. Here is a pic of the stripe and oval decal.
 

Attachments

  • MISC PICS 2-10-10 179.jpg
    MISC PICS 2-10-10 179.jpg
    87.7 KB · Views: 65
Last edited:
If anyone is interested, I edited my last post with a pic of the decals I am looking for. Does anyone have any of these decals for sale?
 
OutRun "oval" kickplate decal

Hi,
Yes I have these decals for sale
I'm a collector and OutRun enthusiast in the UK, and although these seem commonplace (when new) one UK built OutRun machines, I wasn't so sure whether they were on US machines.
Perhaps you US guys can shed some light on this?

Anyway, the decals
Rather than some home made scan and repro attempt, I commissioned a commercial reprographics company to reproduce the OutRun oval decal, and the red stripe decal in small numbers.

The red stripe was based on an original from my (US built) machine
The oval however needed alot more work. The source material was a bad repro done some years ago by a commercial seller, a photo of an original one, and detailed dimensions taken from an original decal.

Therefore, it needed a skilled commercial artist to basically re-draw it - so the standard is superb.

I am expecting delivery of the first batch from the printers within the next few days, and I'll post some photos up in the "For Sale" section.
 
Outrun Stripe

Here's how I "striped my Outrun" --
Captured graphic to 8.5x11, laminated it, pressure adhesive, mounted.

Floor Mat material from Home Depot.
Pedals wrapped in Gorilla Tape.

By the way --

Outrun PCBs (w/abberations) For Sale:
(1) Turbo Outrun PCB (no picture/no sound).
(1) Outrun PCB (stacks of digital tiles on left side of screen).
(1) Outrun PCB (horizonital lines across screen).
(1) Outrun PCB (no picture/no sound).
The components (EPROMs, ICs, etc.) are probably fine -- trace lines on the bottom of the boards have some corrosion that may be causing the aberrations.
I bought these for back-up -- so, if you are a back-up parts type (like me) this may be a good deal.
PM me, if interested.
 

Attachments

  • OutrunStripe.jpg
    OutrunStripe.jpg
    94 KB · Views: 27
Back
Top Bottom